Toasty64

[Bino Gas]

Get the LiMnNi cells. They're like 4Ah and are inexpensive (~$10 I think).

 

[ToastBucket]

I have an 8AH pack of them. They just barely don't fit. These things are Dang tiny.

 

[samjc3]

Get the LiMnNi cells. They're like 4Ah and are inexpensive (~$10 I think).

Lithium Magnesium Nickel? Never used em, but I think they have a lower cycle life, right?

Also, toasty, 8ah 7.4v, whats the size?

 

[ToastBucket]

http://batteryspace.com/LiMnNi-26650-Ba ... r-DIY.aspx

8AH 3.7v

They have a really long shelf life and handle deep cycles well. That's what I was told.

 

[Bino Gas]

@Sam
From the site: "80% of initial capacity at 1000 cycles"
Most of the other batteries have a cycle life of >500 times. I don't know about the 4700 or 5000mAh ones though.

 

[mymixed]

The 5000's are >500.

- mymixed

 

[mymixed]

The 5000's are >500.

- mymixed

 

[samjc3]

@Sam
From the site: "80% of initial capacity at 1000 cycles"
Most of the other batteries have a cycle life of >500 times. I don't know about the 4700 or 5000mAh ones though.

1000 @1c rate. Im not sure how that equates at a higher rate, but it should be epic. I wish I could buy single cells.

 

[ToastBucket]

you could buy two then cut them

 

[ToastBucket]

Sorry for double post but I wanted to post again I'm thinking of doing a wireless breakout box for controllers using a transceiver on the data lines.

http://cgi.ebay.com/2-x-Newest-2-4Ghz-n ... 501wt_1242

Which leads me to my question. Could I theoretically program an IC to combine the data lines of the controllers, then send the single data line through ONE transceiver in the unit to another transceiver in the breakout box. The signal would then go into another IC to separate the 4 signals. I know it's possible, my main concern is the difficulty level (I have no experience programming IC's) and a delay/data corruption risk this might introduce.

 

[ToastBucket]

The 5000maH cells are now in stock. Just bought 2.

 

[ToastBucket]

Got the batteries. They're small. I'm gonna sand all the paint off and send it to Ish. I painted the stencil he made me on there, but I was bad at it, and messed up, and stuff. I want this to look good, so I'm just going to send it to him, because he's Ish, and he can do it right. I also thought of cool things which you'll hopefully see pics of next week.

 

[ToastBucket]

The back of the Toasty, courtesy of MR's resident whale

http://i52.tinypic.com/99qxlk.jpg

 

[bud]

Awwwww yeeeeah. That's awesome.

 

[Basement_Modder]

Toast bucket XD

 

[zeturi]

Yes!

 

[mymixed]

This will be one the most epic portables ever. The TB in the middle is a nice touch.

- mymixed

 

[zeturi]

I wanna be the second person to play with it.

 

[ToastBucket]

MRCA

 

[ToastBucket]

Fun update. Kinda. Got my case back Here's some pics. I guess I was using a different texture paint because Ish's feels very smooth whereas mine was more of a grainy feel.

Next thing up is to mount the controls and screen and stuff. I'll do all that soon. Still gotta cut the ethernet port hole for the breakout box.