OSSIM STUFF ON PG 17! Worklog: The TriSixtyFource

[bentomo]

Re: Worklog: The TriSixtyFource

Make sure to use a lot of hot glue on the inside to back up the controller flanks, when you sand down that jb weld it won't have a good grip on flat plastic. It will definitely need to be glued on the inside to support it. (at least from my experience with jb weld, unless you know something I don't )

 

[ShockSlayer]

Re: Worklog: The TriSixtyFource

I do. See where the controller meets with the case at the top? Brackets. Also, I need to add some more epoxy and I'll have it smooth and sanded, it won't be a flat right angle on the back, it'll be a curve. There'll be plenty of support, plus I'm going to be epoxying the mobo on to the back of the case, so there's more support. I might run a metal bracket across the back too. Either way, just some epoxy was just fine for my 1st GCp, so there is no way this thing'll break!

SS

 

[bentomo]

Re: Worklog: The TriSixtyFource

Awesome, glad you planned it out that far.


Now please just don't use tact switches.

 

[ShockSlayer]

Re: Worklog: The TriSixtyFource

I don't like how the flanks are turning out.

So imma make a new case!
Looks like a dsi with only one hole like that. XD

The reason for the hole is revealed!

battery battery battery pack

Chopped mobo with installed 3.3v regulator, rewired av and p1 ports, relocated cart slot

*GASP HE'S USING A REV 9 MOBO*

Where the mobo is gonna stick out lol

board in place

how much it sticks out

I'm going to install an exploit into my soldering iron that'll let me run a modified epoxy file so I can use this to my advantage and run me some advanced cart slot covers.

SS

 

[zeturi]

Re: Worklog: The TriSixtyFource

Dang IT. I WAS GOING TO DO THIS. LOOKS LIKE A GOOD IDEA.

 

[Ampersand]

Re: Worklog: The TriSixtyFource

Awesome points for testing with Army Men Air Combat.

 

[bentomo]

Re: Worklog: The TriSixtyFource

What's the capacity of that thar battery pack?

 

[βeta]

Re: Worklog: The TriSixtyFource

So are you losing the flanks all together?
THANK GOD.

This is exactly the portable I've been begging you to build.

 

[Basement_Modder]

Re: Worklog: The TriSixtyFource

LOVE IT!

Can I have the old case?

 

[ShockSlayer]

Re: Worklog: The TriSixtyFource

What's the capacity of that thar battery pack?

7.4V 4250mAh 31.45Wh

http://www.batteryspace.com/CustomPolym ... 38PID.aspx

SS

 

[Mako321]

Re: Worklog: The TriSixtyFource

I was going to have the exact same design on some portable I was thinking about.(but probably will never be able to do)

 

[ShockSlayer]

Re: Worklog: The TriSixtyFource

Screen arrived today.

Epoxied in controls.

SS

 

[βeta]

Re: Worklog: The TriSixtyFource

PIX

 

[zeturi]

Re: Worklog: The TriSixtyFource

NAO

 

[zeturi]

Re: Worklog: The TriSixtyFource

Oh yeah, so what's the name about? You gonna try a special paint job?

 

[ShockSlayer]

Re: Worklog: The TriSixtyFource

I put on 6 layers of paint. It's not done yet, there are still a few infirmities in the case.

Also I gotta build myself an audio amp and cut some screens holes and switch/power jack holes too.

SS

 

[βeta]

Re: Worklog: The TriSixtyFource

You're supposed to sand first.

 

[ShockSlayer]

Re: Worklog: The TriSixtyFource

I DIIIIIIIIIIIIIIIIIIIIIIIIIIIIIDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD

 

[zeturi]

Re: Worklog: The TriSixtyFource

But it still is looking far sexier than previous projects, SS. I love it. The SL-68p is so comfortable to hold. And it's pocketable. In case anyone else is wondering, the SL-68p is almost exactly the same size as a DMG.

 

[Joeyjoe9876]

Re: Worklog: The TriSixtyFource

you C-pad is kinda lopsided.. just my OCD speaking but it does look nice.