GCV Worklog!

[ShockSlayer]

Re: Gamecube VITA WORKLOG+Vita Mini!!

All of you know that I am just as high up there as you guys. (That was not a statement to mouth off about myself.)

I give up on you.

 

[SonyQrio]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Nukear, I'm sorry for hijacking your worklog. Everybody, I'm sorry for all the things I've done, jokes or not. I'm going to leave for a while and see if things smooth out without me.

Good luck, and good bye ModRetro.

-SQ

 

[Noah]

Re: Gamecube VITA WORKLOG+Vita Mini!!

You should post that in the leaving forum before someone locks this thread. That wouldn't be good.

 

[ShockSlayer]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Ain't gonna lock somebody's worklog because of a little fight.

Let's get back on topic then, maybe with some progress or something, that'd be cool.

 

[Kickback]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Nukear, I'm sorry for hijacking your worklog. Everybody, I'm sorry for all the things I've done, jokes or not. I'm going to leave for a while and see if things smooth out without me.

Good luck, and good bye ModRetro.

-SQ

Things will go fine without you, you're a prick anyway.

Yeah, on-topic.

 

[nuke]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Ain't gonna lock somebody's worklog because of a little fight.

Let's get back on topic then, maybe with some progress or something, that'd be cool.

Yup. Trimmed my screen, installed custom reg, and haz started to trim my heatsunk. Im using a drill press and a grinder bit, and clamped my heatsink on the vice, so that the heatsink would be 100% even on the top.
Problem?
Its taking FOREVER.
20 minutes of cutting. 1mm of aluminum madness has been cut.
Im trying to get a different grinder, but for now, Im stuck with this.
Haven't tested my mobo or my screen, Im waitin on parts from bud.

 

[ShockSlayer]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Gonna put the fan into the heatsink or just trim it down?

 

[nuke]

Gamecube VITA WORKLOG+Vita Mini!!

Yup

 

[ShockSlayer]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Yup as in Yup you are just trying to trim it down or Yup you are putting the fan in it.

SS

 

[nuke]

Gamecube VITA WORKLOG+Vita Mini!!

Trim it then cut teh hole for the fan.

 

[nuke]

Gamecube VITA WORKLOG+Vita Mini!!

Ss. Do you have some tips for trimming the bottom of the psone screen?

Oh yeah. Forgot to say I wired my 256 mb memcard as well.

 

[ShockSlayer]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Whatever's on Kyo's site.

SS

 

[nuke]

Gamecube VITA WORKLOG+Vita Mini!!

 

[nuke]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Hey Guys, my epoxy that is holding the gc and the memcard just dried, and Im wondering if that was a mistake. I have a very thin layer of epoxy between the two, what are the chances of it getting shorted?

 

[ShockSlayer]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Turn it on and find out!

 

[nuke]

Re: Gamecube VITA WORKLOG+Vita Mini!!

 

[nuke]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Never Mind. Using my favorite tool(Brute Force ) I managed to ripe the memcard off safely.
But of course one of chips IC legs breaks off.
But all is good now because I melted it back on.

 

[nuke]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Vita Mini Project has started.

Specs:
4.3 Inch Screen
OMGWTF CUT Board(Wiring the DVD/Wiikey right now )
Wiikey Fusion

Thats it for now. Update in a few days.
I also need two MX chips with IPL 1.1. If you have a dead IPL 1.1 board, please PM me.

 

[mog123]

Re: Gamecube VITA WORKLOG+Vita Mini!!

Woot, 12 pages and you started it already?

 

[nuke]

Gamecube VITA WORKLOG+Vita Mini!!

Lol what the *Can'tSayThisOnTV*?

Did you even read the thread?