GCV Worklog!
- Thread starter nuke
- Start date
nuke
Well-Known Member
Re: Gamecube VITA WORKLOG+Vita Mini!!
Guys, Im following http://kyorune.com/modding/article.php?id=56 to trim the bottom of the PSone screen.
Is this guide correct?
Guys, Im following http://kyorune.com/modding/article.php?id=56 to trim the bottom of the PSone screen.
Is this guide correct?
bud
DAT ASS
Re: Gamecube VITA WORKLOG+Vita Mini!!
Nukear, I can send you that exact component if you'd like. I have a few old psone screen boards that I use for parts so I could desolder it and pop it in an envelope for you.
You blithering idiot. You have obviously never seen a psone screen board. The component says nothing whether the "100" is referring to farads, or microfarads. It is a 100 microfarad 16 volt capacitor. Nukear simply needed confirmation since the component isn't properly labeled. You shouldn't scold people about their query when you don't even understand what they are asking. So stop acting like a know it all little prick. You've been told this countless times.SonyQrio said:Nukear, those numbers are printed on the capacitor for a reason. Would it be logical to write 100 16v on a capacitor then have it be 246µF 8v one? No...
Nukear, I can send you that exact component if you'd like. I have a few old psone screen boards that I use for parts so I could desolder it and pop it in an envelope for you.
SonyQrio
Frequent Poster
Re: Gamecube VITA WORKLOG+Vita Mini!!
By no means do I know everything about modding. I making a logical assumption to accomodate the current situation.
Bud, ask yourself, would there be a 100 farad capacitor on the PSOne screens board? Highly unlikely. Even if you did stick a 100µF capacitor in place of a 100 farad capacitor, it wouldn't hurt the board. It's like undervolting.
Nukear, don't wait for Bud to send you the part. Just use one of the 100µF 16v capacitors you got from the Hacker Dojo.
And for the love of sake, quit calling me a "prick", "jerk", "know-it-all", and whatever other names you call me. All of you know that I am just as high up there as you guys. (That was not a statement to mouth off about myself.) I'm being quite serious.
By no means do I know everything about modding. I making a logical assumption to accomodate the current situation.Bud, ask yourself, would there be a 100 farad capacitor on the PSOne screens board? Highly unlikely. Even if you did stick a 100µF capacitor in place of a 100 farad capacitor, it wouldn't hurt the board. It's like undervolting.
Nukear, don't wait for Bud to send you the part. Just use one of the 100µF 16v capacitors you got from the Hacker Dojo.
And for the love of sake, quit calling me a "prick", "jerk", "know-it-all", and whatever other names you call me. All of you know that I am just as high up there as you guys. (That was not a statement to mouth off about myself.) I'm being quite serious.
