Fox64
- Thread starter MegaAwesome13
- Start date
MegaAwesome13
Member
Here 
So how do I fix the problem? if you can't see it, what it is is the metal expanded from the heat. It doesn't want to stick to the solder. Is there any advice?
So how do I fix the problem? if you can't see it, what it is is the metal expanded from the heat. It doesn't want to stick to the solder. Is there any advice?
MegaAwesome13
Member
I have.... :/
ToastBucket
tost
If those are cylindrical cells with tabs, then you desoldered the tab. You can solder it back on but I wouldn't. Its very dangerous and could damage the battery.
MegaAwesome13
Member
So should I get new ones? Also, is there a way to prevent this from happening?
ShockSlayer
Probably SS
sand/file the tab so it's rough, it's easier to solder to then.
MegaAwesome13
Member
The tab didn't break. A part before it did.... Sadly, my camera isn't that good, so I can't show any pics of it.
Diminuendo
Well-Known Member
Ok, I just viewed that "The Preview for Fox64" link in your sig and it had nothing to do with anything
MegaAwesome13
Member
Yeah, a vid preview.... wasn't suppose to do anything. lol
Diminuendo
Well-Known Member
a preview of what? you wrote text that could of just as easily been put in a post and used clips of starfox assult
MegaAwesome13
Member
I was bored and i wanted to do something.... And a preview of something to come ^^
ToastBucket
tost
Be a man. Make mockups
Diminuendo
Well-Known Member
exactly, I clicked the link cuz I wanted to see what you were aiming for, I got aboslouly no new information
MegaAwesome13
Member
I has pics now, so it should be better 
Update: Burnt the flax!!! Out of my finger with the soldering iron; however, that stupid tab is fixed!!
Update: Burnt the flax!!! Out of my finger with the soldering iron; however, that stupid tab is fixed!!
MegaAwesome13
Member
Well, I have my $700 and I'm ready to get back on track!
ToastBucket
tost
Go in MSPaint and draw a picture of your basic idea plez
MegaAwesome13
Member
I will have L, R, and Z buttons on the back. They will be some push buttons from radio shack. There is a ps2 control stick, original A, B, Start, and C Buttons, and original D-Pad.
I cut the connection between the ether ports and the power supply to make the card slot holder. There is also a hole in the back for a memory card holder.
Similar threads
