Search results

I found out what the problem was. After closer inspection I realized that I had removed the 2 mx chips from the motherboard a while back.

Thanks! I just checked ground and 1.9v on the motherboard and they seem to be bridged together, there is no resistance between them. I checked everywhere on the board but I can't find the connection.

So I have a spare GC motherboard and I would like to know what's the problem with it. It's still in it's original state without any trim done to it. I tried plugging it into the TV, and when I turn it on, the screen flashes once and stays blank. If I touch the processors, they are generating...

Hey Zelda! Do you still have 'em? If so I'd be really interested...

Dang, if I had the money I'd buy this right now!!! But my studies are eating my money away...

So I wired up my wiikey to my board using a breakout board. When I power the GC on, I get the red light on the Wiikey. I get the purple interrogation point in the menu, then an error message. Last time I did this I had the wiikey menu popping up immediately when I fired up the Gamecube. What...

Re: Please help me! i dont know if i should try to make a GC If you try to make a gamecube portable and have never worked with electronics before, be prepared to break parts. Seriously I've been though 3 gamecube motherboards already and I'm not done with my first portable. I also destroyed 1...

So I have 2 boards that are just unusable right now because I have a very frustrating problem. On both of them when I check with a multimeter 1.9v is bridged to ground. One of them is trimmed with nothing soldered onto it and the other had the regulator board reconnected with wires then the...

Nice to see someone else considering the idea of 3d printing! I made a complete 3d model of a case in the computer, but i'm waiting to get an actual printer to do it. by the way, here is a 3d printed NES portable, it's really cool! http://www.youtube.com/watch?v=PuUKZUOKYpU Et je parle...

That case is just pure sex. i'm more excited right now than I was when I first saw the Envision presentation. (Sorry Tchay) May I ask what do you use to drill those holes so perfectly? When I use the dremel everything is just so messy.

Like you said, here is my reply. i'd like to have one wkf.

Moar pics!!!

it's possible with the biggest one. and just so you know you can get real softcase for free as sample.

Check on ebay, there are some cheap adapters out there..

On the box it says 12v +/- 10%, but I've seen similar screens running off of 3.3v. I just tried with 12v and it works perfectly. Let's just hope that it will work with 7.4.

Totally agree, the world always needs more CGP made by Ashen.

Dang it Ashen, your cases are always perfectly smooth and cut... Can't wait so see more!

Alright so I got another screen and I wired it to my mobo. when I turn it on this happens: http://www.youtube.com/watch?v=FKFWUNJN3xA If anyone know the anwser please let me know. BTW the screen is powered with 5v.

something like this? http://www.ebay.ca/itm/32pin-FFC-FPC-fl ... _786wt_699

Really? What am I doing wrong? But out doesn't change the fact that I can't get any kind of response from my board, or even the regulators.