Monstercrunch GCp Worklog

[Monstercrunch]

Ok, I understand, but on the Gameboy Fusion there is just a slide lid switch, isn't it ? If I get the troubleshooting your are talking about arn't dangerous for the WKF ? Just need to reboot and it's gone right ?
And what about the steps I listed ?

Thanks for your patience

 

[Monstercrunch]

Ok guys, it's working !
There is just one problem: the lid switch doesn't do anything... Even if I let it open for few second, nothing happens (there are 3 games on the SD card)
The soldering is good, the switch works (tested with my multimeter), so what could I do ? (the switch lid is used to go back to the game selection, isn't it ?)

 

[Monstercrunch]

I thank my last question was an easy one... Maybe those new pictures will help you to find an answer ?

Before first coat

After first coat, not smooth enough so I add some mastic to improve it

More soon... very soon....
Actually, I can even finish it tomorrow, if my lid switch problem is fixed in time

 

[Monstercrunch]

Hi guys, I tested my wiikey and everything was ok, games loaded and worked wery well... but I tried something I shouldn't:
-I installed a Reset button, thinking that it would allow me to reset the gamecube and reload swiss and chose an other game instead of turning the gamecube off and on. But something happened: when I pushed the reset button, it's just the game that have been reseted (it started again just like if I loaded it from the wiikey).
-So I turned the GC off and loaded swiss, but on the selection menu it was like if the bottom button was lock (I couldn't chose the game cause the selection was going down alone).
-So I turned it off again, I tested my button but all of them were ok, and I reloaded swiss. And now, it's locked on "init wiikey fusion" .
-I restarted it few times, tried to use the reset button, but nothing have changed, it still locked

What can I do to fix it ? Please say me that I can fix it...

[edit] The wiikey still working in fact, I removed all the games except one and it's working, but if I add an other one, it lock on "init wiiky fusion". Any idea ?

 

[DuHasst0]

I think its your sd card format and put your games back on it and try again

 

[Monstercrunch]

Ok, I put games back on it and it worked, very strange... Some iso doesn't work, so I'll test them all separately. I'll see if everything work.

I played SSBM for few minutes and it freezed, I re-tested it for few minutes and nothing abnormal happened, is it normal this kind of freeze with the WKF (I mean, will it happen some times or normally it will not happen at all ?)

Thanks for your response

 

[Monstercrunch]

Hi, I still have some troubles with my wkf after a fat32 format (I had already done it before but did it again)... it's very strange: it works randomly, I mean sometimes it's working well, sometimes it's not (and sadly it works less than it doesn't... 1/3 of boot I would say ).
More over, I still have a freezing problem (not a lot hopefully, but it's embarrassing when it happens).

Is there a solution ?

Thanks.