plz help me

[NeoExdeath]

I'm new to modding, well kinda. But I still need some suggestions or help. You can help me in any way you want, but there are also some questions I would like to be answered.
These Qs are;

•How to remove a Gameboy color screen.

•Subsititions for a gamebit screw driver besides BIC pens and cut flatheads.

•If I can help you in ANY way.

So if you have the time, please give me some help. Plus if you need help in any Metroid (except 2), Zelda, or Final Fantasy games (1-6), let me know, when it comes to those games, I'm the closest thing to profesional possible.

So once again, please, help a brutha' out. Wud' ya'?

 

[snowpenguin]

as for the screwdriver, you can use some hex screwdrivers. It'll have a hexagonal hole in it, and there's a size that will remove the larger screws if you give it a little pressure, I THINK it's 5/32, but bring a screw with you to the store to check. There's probably one that works on the smaller ones too.

 

[NeoExdeath]

I'm guessing it works for both types. (3.8 mm and 4.5 mm.)
(liiii <- screw, lol

 

[snowpenguin]

Should, just gotta find the right one for the smaller size.

something like that.

 

[NeoExdeath]

If I'm right, those were the two sizes.

Thanks and all other suggestions will be appriciated!

 

[XCVG]

If you don't mind destroying the screw holes, heating up the screw with a soldering iron then pulling it out with pliers might work. I've heard others have had success with it, but I've never tried it.

 

[Mako321]

Should, just gotta find the right one for the smaller size.

something like that.

Maybe ikea screws(not screw driver things) would work.

 

[NeoExdeath]

Once again, thanks to all of you!