Joystick Help

[scorpio93]

So close... Dang.... setbacks...

I need help on wiring the Superpad mobo to a Gamecube analog stick. I've searched MR and Bac's site and can't set this straight.

I don't know how to successfully wire this. And yes, I've looked at the controller guides etc....

 

[ToastBucket]

Which superpad are you using? A pic off the internet will suffice. I used this one:

Sorry for bad quality pic

This is how I wired it up:

I'm assuming by your pic that 1 and 2 are positive voltage because they are red, black is ground, and the blue and yellow are the axes. You are going to hook up the red and black wires as they are in my pic. As for the blue and yellow, Im not sure which axis they are. They should be labeled, but just correspond them with my pic.

 

[scorpio93]

Got it to work now, lose wire from factory glue was the problem. Thanks for the image though, it helped.