unicycler17
Well-Known Member
Hugo_Peters said:
These things are amazing and tiny and WOW. I cant wait for final pics. You better make more portables after this! Your skill is incredible.
~Gamecube Fusion(s)~ Worklog
- Thread starter Ashen
- Start date
These things are amazing and tiny and WOW. I cant wait for final pics. You better make more portables after this! Your skill is incredible.
Hugo_Peters
Graphics Designer
What does ModRetro says about his skill level?unicycler17 said:
...IT'S OVER NINE THOOOUUSSAANNNDDD!!!!
...WHAT NINE THOUSAND!? There's NO way that could be right.
Hugo_Peters
Graphics Designer
IT IS DONE!?Ashen said:
~PICS~PICS~PICS~PICS~PICS~PICS~PICS~PICS~
unicycler17
Well-Known Member
OMG POST PICS NOW!
Are they both finished, or just one? If just one, you're still gonna finish the other, right?
Are they both finished, or just one? If just one, you're still gonna finish the other, right?
Hackerbilly
Well-Known Member
post pics as soon as you can
Ashen
GameCube Révolutionary
Ashen
GameCube Révolutionary
So... I've run into an interesting little problem now. Wired up my 11.1v battery pack today, charged it all up and everything went fine. However when I plug my GCp into the battery pack the Wiikey fusion refuses to load up the disc loader "channel" (everything else is working fine, system, screen, sound, etc). Plug the unit back into wall power and bam! It works... while running off battery power the Wiikey fusion is working, I can tell because the blue LED comes on. I'm at a loss... any ideas? I figure it must have something to do with pin 29's connection to ground and the break action it requires to load up the bootloader. Still dunno why it wont work though.
Edit: Tested the battery pack on my "home console" cube modded with the Wiikey Fusion and that works fine... Hmmmm... ><;;
Edit: Tested the battery pack on my "home console" cube modded with the Wiikey Fusion and that works fine... Hmmmm... ><;;
That is not good...
Is your "home" gamecube trimmed ? How is the wiikey fusion soldered to it ? What is displayed on the screen of the GCp (an error or juste "no disc inserted")?
As it is working on your "home" gamecube, we can say that it is not a problem of wrong voltage...but you should take some measures to be sure...
How long are the wires you are using to solder the wiikey to the mobo ? From where are you taking the power supply for the wiikey ?
You can try to put a capacitor (6V 50nF, the capacity is not critical but 10-100nF should be OK, DO NOT put a big capacity, there is a risk of shortcut !) in parallel between wiikey's 3.3V and GND , at your own risk...
It's my only idea, hope we will found out the problem !
Is your "home" gamecube trimmed ? How is the wiikey fusion soldered to it ? What is displayed on the screen of the GCp (an error or juste "no disc inserted")?
As it is working on your "home" gamecube, we can say that it is not a problem of wrong voltage...but you should take some measures to be sure...
How long are the wires you are using to solder the wiikey to the mobo ? From where are you taking the power supply for the wiikey ?
You can try to put a capacitor (6V 50nF, the capacity is not critical but 10-100nF should be OK, DO NOT put a big capacity, there is a risk of shortcut !) in parallel between wiikey's 3.3V and GND , at your own risk...
It's my only idea, hope we will found out the problem !
Tchay
Frequent Poster
Ashen said:
Did you test all the voltages? Maybe a voltage isn't getting to where it needs to? Test the wiikey to make sure its getting everything it needs. This may sound silly, but sometimes I mess everything up after wiring up the smallest things, so check all your wires to make sure nothing got bumped off, etc.
Ashen
GameCube Révolutionary
I've checked everything :/ works perfectly fine plugged into the wall. Only issue is when running from the batts. Meh.. I'll figure it out when I have more time.
Other than the slight issue with that...
Opinion needed on this:
What do you guys think about the white buttons against the black case? Its up to emu in the end of course. This one is his. I know the photo is sideways.. Sorry cant do much about it from my iPhone.
Opinions welcome!!
Other than the slight issue with that...
Opinion needed on this:
What do you guys think about the white buttons against the black case? Its up to emu in the end of course. This one is his. I know the photo is sideways.. Sorry cant do much about it from my iPhone.
Opinions welcome!!
Haha not too shabby as is your white one
Though I do think your button configuration is a little weird as far as
A,B,X and Y's positions.I mean compared to the gemecube controller.
Otherwise great work and nice colors my friend!
And I do hope you solve your battery issue
That is very strange....
Though I do think your button configuration is a little weird as far as
A,B,X and Y's positions.I mean compared to the gemecube controller.
Otherwise great work and nice colors my friend!
And I do hope you solve your battery issue
That is very strange....
Tchay
Frequent Poster
Vansman said:Haha not too shabby as is your white one
Though I do think your button configuration is a little weird as far as
A,B,X and Y's positions.I mean compared to the gemecube controller.
Otherwise great work and nice colors my friend!
And I do hope you solve your battery issue
That is very strange....
Its a replication of the wii classic controller. completely normal setup.
And I personally like the black and white contrast Ashen!
unicycler17
Well-Known Member
I love the contrast. Leave it as it is. I can't imagine why your battery pack isn't working, especially since it works on your wiikey modded cube. Maybe you could try it with 14.8v? idk
