DJ711's N64p W.I.P Thread

[D.J]

Hey guys many of you don't know me but I hope to change that.


Alright, I have these things done



PSone screen: 25% done (need to solder wires when N64 is open)
N64: 10% (Case is now open and I'm dealing with the meatal shielding. ITS EVIL!!! :evil: )
Case: 80% (Need to make places for cart slot and headphone jack)

Hope to be done: In 7 weeks after the metal shielding comes off


Alright I'll get some more pics for you guys soon.


Can someone please tell me what size phillips screwdriver to use on the screws on the metal shielding.

 

[XCVG]

Standard Philips screwdriver, about 3/8" should be fine.

Translated into American.

In all seriousness, use a smallish philips driver that is somewhat pointy.

 

[D.J]

Alright, thanks.

 

[eurddrue]

Standard Philips screwdriver, about 3/8" should be fine.

Translated into American.

In all seriousness, use a smallish philips driver that is somewhat pointy.

I had to use a large screwdriver, because I kept stripping my small screwdrivers on the black screws

 

[Basement_Modder]

Those screws are tedious. I have found, though, that if you have a REV-9 board, they are easier to get out. Of course, this means no direct soldering of expansion ram chips.