Pinout of the 3.5 TFT LCD

[trevor403]

I'm sure you're all familiar with this board, it goes in the common 3.5" backup cam. It's this one, http://www.ebay.com/itm/like/291268276579. Would anyone happen to know the pinout of the video and power solder points in the red box? The plugs fell out before I could mark down the pins and there is no indication on the silk screen of what they could each be. Thanks!

 

[Ashen]

Holy fakn huge picture....

From left to right as shown in the pic. Video 1, video 2, ground, power.

 

[trevor403]

Awesome, so I didn't short my board! just need to switch the video pin... Thanks Ashen

 

[trevor403]

Hhehe i will never stop with my huge pictures! Thanks again btw