Search results

I haven't had the time to mess with it lately and it bugs me that its just sitting around. THIs would be good for someone who wants to get into building GCP's because alot is done, but you still have things to do on it. Has everything wired up except controller(needs a new one), case needs to be...

The way my GCP is set up, the controller is in a slit cut on the heat sink. The heat sink does have a fan on it but still gets hot to the touch . The controller, I soldered to the chip for and and b (with magnet wire then to ide wire it was all I had) but to the traces for x and y, I threw an...

I have an official WKF for sale. I need a quick sale. Includes ribbon cables and sd card holder/connector. Never tried to get it to work but it should work . $20 USA

well, really 4 days about. I had some left over parts from a failed attempt at a 2nd gcp . Got bored and started sifting through the parts. I started with a rev c, 3 (4?) in screen. NO speakers(using headphones) and a zn-40 case. I'll admit it , I was lazy , I probaly could have mafe it two...

I didn't touch the A/V at all , strangely the audio is all static-y ? I can hear the right sound/music in a game but it sounds like static another way i could explainwhat it sounds like is as if wind was blowing over the mic when it was recorded, i dont know what is wrong, i have had this...

got a new 4.3 in screen, and the backlight flickers , slightly . games are still very playable but im just ocd about it. I may have gave it too much power though, 12v @ 3amps from the gc psu. Could that be it?

Long story short, I have bad grades so i no longer have a tv to test, i was bored and re wired my wiikey, turn it on, I get one blue light that blinks on and off once and thats it, it will blink every time i press the eject button. That good or bad?

So I got a new laptop and want to sell my old one, see this thread for some pics http://gbatemp.net/threads/would-anyone ... op.335350/ , the silver painted cover comes off easily , and the keyboard as well, since I have takin it apart numerous times, the power is hard wired to the adapter as...

Need a rev c gamecube, just really need the board . Paypal, US.

There are some lots of gc's of ebay that don't read discs. I'm assuming this has to do with the lens and still will work fine with a wiikey? Thanks.

So I f'd up, wired up my wiikey to a ipl 1.0 (dol-10) . I've heard if you input 1.9v then it will work , BUT it is not good for the drive apparently, can I and How do I input 1.9v , then Flash it with swiss(again how would I do that) Then Power it with 3.4v again? Really Lost now .

So I wired up everything, to the breakout board and turned it on , went to the title screen but no lights on the wiikey, I do not have a controller at the time(broken) but shouldn't there be a blue light on the wiikey, or is it only on when it is being "played" Thanks guys, tom.

So I know I should have used a real one, and I do have one coming now, but I used a 3rd party any way. First off, I know none of the colors are right , I did my own Pinout based on the Plug and the wires. I concluded that the yellow (normally 5v) was 3.43 in , red was data, white+black were...

Before I even try to hook up batteries to it , I tried powering on with the ac adapter, The LED blinks on and off once, then nothing happens, no video either. (pretty sure i hooked it up right) , there is no DD right now , I'm working on wiring the wiikey but I have used other gamecubes and It...

I have a 7.4v battery that I want to use with my gamecube, not trimmed, still has the regulator. WHat needs to be done, I know with the other ones you just jumper the sound with 5v but Idk what to do on a rev c, I doubt I can just "plug and play"

It was for my bulky GcP , I now have a real case (zn40) and it will not fit in the case the way I would like it to , I can have pics later tomorrow, Debating on trading with the battery or not, I may need it. Now I want to trade for a smaller one, 4.5-5 in should do nicely. US Only.

I just need the r- shoulder plastic piece, anyone have an extra one ?

So i sanded the paint off an official controller and wired it up, played a game and it acted as if the b-button was help down, disconnected the wires from the solder points and it still does the same thing, no continuity between the two points any ideas?

For those of you that read this, I have determined that the issue is the BIOS of all things, I have tested games and they run fine, I guess everyone should test their sound with a game next time the have issues instead of throwing it away. If anyone wants i can get a video up of this

So I still have those intec lying around and it seems the micro controller went and the battery no longer charges( doen't get power anymore) Can I just hook the 12v line to the battery to charge it since it's not lithium? I want to get some input on this before I do it.