3rd Party controller

[tom10122]

So I know I should have used a real one, and I do have one coming now, but I used a 3rd party any way. First off, I know none of the colors are right , I did my own Pinout based on the Plug and the wires. I concluded that the yellow (normally 5v) was 3.43 in , red was data, white+black were ground. I was completley wrong. :

Yellow = Ground (WTF)
Black =Ground
White= Rumble
Brown = Ground (I think)
Red=DataLine/ 3.43v in

It gets power from the data line, wouldn't that effect the Data? If someone already did a pinout, them I am bad at using the search function.

 

[superben51]

Post pictures. Also, there are too many ground connections there. One of them should be a 3.4v in.

 

[Prog]

So you've determined that the 3rd party controller uses different wire colors?
That's fine, red wire doesn't *have* to be data or whatever. The pinout will be the same, but it's just got different wire colors.