Livewire15 said:
Zack, would you happen to have a DWG or similar AutoCAD drawing of a GC controller? I'm drawing mine out before I commit to making any modifications to my case or controller. Maybe even accurate dimensions of the buttons, d-pad and analog sticks. Anything helps. Thanks!
There's an SVG of the controller layout that I just shared. If you open it in Inkscape, you should be able to save it as a DXF or PLT file, if either of those would be useful.
I also saved a DXF version of my own layout. Here's both versions.
DXF http://www.mediafire.com/download/n0acc ... e_face.dxf
SVG http://www.mediafire.com/download/acofh ... e_face.svg
The button cutouts on my design are to scale, so you could get measurements from there.
Here's some measurements just to be convenient. Remember these are measurements of the
cutouts, not the buttons themselves.
A button - 16.747mm diameter
B button - 10.438mm diameter
C-stick - 22.979mm diameter
Analog stick - 23.472mm diameter
D-pad - 19mm x 19mm
Start/pause button - 6.449mm diameter
The X and Y buttons are hard to get a measurement on because of the odd shape. Plus it's worth noting that I still need to do some editing on the X and Y buttons. The X button is a bit skinny so the fit is tight, and I think both buttons should be a bit stubbier. I don't know how you're fabricating this, but please test the cutouts before doing anything final. You'll want to make some prototypes and test cuts/prints until you know that everything is perfect.