Miceeno
Member
Delti90 has commissioned me to build him a case for his portable. He wants the following:
GameCube Analog
GameCube D-Pad
Nintendo 64 A,B and C's
Nintendo 64 Start
PS2 R, L, and Z's
PSone Screen
4 Cell Battery Pack
Pretty standard stuff so lets build it. I'm pretty excited to have a go with the legendary PSone screen seeing as I've always been too cheap to buy one for my personal projects.
Here's the parts Delti90 sent me (he sent a complete GameCube controller too).
Here's the victim case.
The case was too big and too square so I quartered it so I can remove material and put it back together. Also, I've done some cutting on the PSone screen.
Here's about what I'm going for give or take some width.
Here's the side pieces slathered in epoxy. It this point I regret not salvaging the parts of the case that are full of holes to use as speaker grills but I'll find something that will work for that later.
GameCube Analog
GameCube D-Pad
Nintendo 64 A,B and C's
Nintendo 64 Start
PS2 R, L, and Z's
PSone Screen
4 Cell Battery Pack
Pretty standard stuff so lets build it. I'm pretty excited to have a go with the legendary PSone screen seeing as I've always been too cheap to buy one for my personal projects.
Here's the parts Delti90 sent me (he sent a complete GameCube controller too).

Here's the victim case.

The case was too big and too square so I quartered it so I can remove material and put it back together. Also, I've done some cutting on the PSone screen.

Here's about what I'm going for give or take some width.

Here's the side pieces slathered in epoxy. It this point I regret not salvaging the parts of the case that are full of holes to use as speaker grills but I'll find something that will work for that later.
