Gameinator64
Member
all of the guides on here look very useful. but it doest help me because my gcp mobo looks different, what do i do
Kasar's GCp guide!
- Thread starter Tchay
- Start date
Hackerbilly
Well-Known Member
dude that was a major bump you just did see the date on the last post it was dated almost a year ago try not to do that again
Tchay
Frequent Poster
I've made some updates. Take a look at the first post. 
I still have a LONG WAY to go, but its getting there.
Kasar wanted this to be open source, so I am making long overdo changes to this guide.
Suggestions are always welcome
Tchay
I still have a LONG WAY to go, but its getting there.
Kasar wanted this to be open source, so I am making long overdo changes to this guide.
Suggestions are always welcome
Tchay
MoRZiLLo
Active Member
Nice to see renovation on an old guide for noobs! Thanks Tchay and welcome to staff 
A pair of lines can make revision 2.0 for example in the mobo part wiring
"bridge pins 2 and 13 from the MOBO and wire them to pin 13 of the regulator board to the system get 5v"
correct is :
"bridge pins 2 and 13 from the MOBO and wire them to pin 13 of the regulator board to the system get 1.9v"
And the image from harsboy wiring revision C only says "image" but i can't see.
Glad to help
A pair of lines can make revision 2.0 for example in the mobo part wiring
"bridge pins 2 and 13 from the MOBO and wire them to pin 13 of the regulator board to the system get 5v"
correct is :
"bridge pins 2 and 13 from the MOBO and wire them to pin 13 of the regulator board to the system get 1.9v"
And the image from harsboy wiring revision C only says "image" but i can't see.
Glad to help
Tchay
Frequent Poster
MoRZiLLo said:Nice to see renovation on an old guide for noobs! Thanks Tchay and welcome to staff
A pair of lines can make revision 2.0 for example in the mobo part wiring
"bridge pins 2 and 13 from the MOBO and wire them to pin 13 of the regulator board to the system get 5v"
correct is :
"bridge pins 2 and 13 from the MOBO and wire them to pin 13 of the regulator board to the system get 1.9v"
And the image from harsboy wiring revision C only says "image" but i can't see.
Glad to help
Thanks! Fixed the 1.9v typo. I am able to see the image whenever I load the page. Go to this link and see if the image loads for you or not: viewtopic.php?f=36&t=587
hey all ^_^
sorry for bumping an old topic and for taking so much registering, anyway I guess its better later than never
thanks a bunch for using,updating and fixing grammar on my guide ^^
yeah, I know that probably the fixing grammar on this guide has been a hard task, my apologizes from this little spanish english-naab
hehe thank you very much guys
posts like those motivated to get me registered at this site
thanks also to all people fixing grammar at the guide and Zero, wich fixed the forum registry allowing me to move my ass here
edit: oops, forgot to say, I updated my guide some time ago, feel free to use the new images and stuff at this place too
sorry for bumping an old topic and for taking so much registering, anyway I guess its better later than never
thanks a bunch for using,updating and fixing grammar on my guide ^^
yeah, I know that probably the fixing grammar on this guide has been a hard task, my apologizes from this little spanish english-naab
PalmerTech said:Kasar needs to get his ass over here, this is easily the most helpful Gamecube document out there.
Kyo said:
hehe thank you very much guys
posts like those motivated to get me registered at this site
thanks also to all people fixing grammar at the guide and Zero, wich fixed the forum registry allowing me to move my ass here
edit: oops, forgot to say, I updated my guide some time ago, feel free to use the new images and stuff at this place too
, es bueno encontrar a mas españoles por aqui RaAaK the FoX
Member
?
hailrazer
Frequent Poster
RaAaK the FoX said:
It's a terrible battery. The actual mAh is around 1800 mAh.
hailrazer said:RaAaK the FoX said:
It's a terrible battery. The actual mAh is around 1800 mAh.
do you mean that the specs are wrong in that site?
RaAaK the FoX
Member
ok can you give a link with good battery for 20 $ max pls ?
