superben51
Well-Known Member
Re: GameCude portable worklog
Any board NTSC board over IPL 1.0 and all PAL cubes.
Any board NTSC board over IPL 1.0 and all PAL cubes.
GameCube portable worklog
- Thread starter BayCoder1
- Start date
zeldaxpro
Well-Known Member
Re: GameCude portable worklog
BayCoder1 I did a Theory on GameCube IPL (It pretty much is a fact now) but here's the link:
http://www.forums.modretro.com/viewtopic.php?f=36&t=10226
There you go
BayCoder1 I did a Theory on GameCube IPL (It pretty much is a fact now) but here's the link:
http://www.forums.modretro.com/viewtopic.php?f=36&t=10226
There you go
ShockSlayer
Probably SS
Re: GameCude portable worklog
As I recall, didn't one of the swiss wiikey things that I know nothing about solve the issues with the 1.0 boards making all gamecubes compatible?
SS
As I recall, didn't one of the swiss wiikey things that I know nothing about solve the issues with the 1.0 boards making all gamecubes compatible?
SS
zeldaxpro
Well-Known Member
Re: GameCude portable worklog
Oh thats good to know, thanks Ashen. I was thinking of flashing Swiss to my Wiikey but I think the original Wiikey Loader will be fine for me. I will have to look more into that. I have IPL 1.0 and 1.1 boards so if I ever have to use one of my IPL 1.0 I will definitely flash it.
Oh thats good to know, thanks Ashen. I was thinking of flashing Swiss to my Wiikey but I think the original Wiikey Loader will be fine for me. I will have to look more into that. I have IPL 1.0 and 1.1 boards so if I ever have to use one of my IPL 1.0 I will definitely flash it.
BayCoder1
Member
Re: GameCude portable worklog
Sorry I haven't posted any progress in a while I was busy with school. I redid the case because the JB weld I used would crack every time I tried to add something to it.
http://i1162.photobucket.com/albums/q53 ... 2947ac.jpg
Sorry I haven't posted any progress in a while I was busy with school. I redid the case because the JB weld I used would crack every time I tried to add something to it.
http://i1162.photobucket.com/albums/q53 ... 2947ac.jpg
BayCoder1
Member
Re: GameCude portable worklog
Hey guys, sorry I haven't posted any progress lately but I have been busy with school.
I finally got back to work on this project and made some progress with the case. I made the spacer taller to make room for the batteries that I plan to put in this unit.
I made the spacer 3/4" taller. It's a little over kill but I think I could use the room. All I need to do is fill the pits with Bondo and the spacer will be finished.
I ran into a problem with my wiikey, it freezes in the middle of games. I don't know if its the wire length or something else, but if anyone has a suggestion on what it might be I would appreciate the help.
Hey guys, sorry I haven't posted any progress lately but I have been busy with school.
I finally got back to work on this project and made some progress with the case. I made the spacer taller to make room for the batteries that I plan to put in this unit.
I made the spacer 3/4" taller. It's a little over kill but I think I could use the room. All I need to do is fill the pits with Bondo and the spacer will be finished.
I ran into a problem with my wiikey, it freezes in the middle of games. I don't know if its the wire length or something else, but if anyone has a suggestion on what it might be I would appreciate the help.
ShockSlayer
Probably SS
Re: GameCude portable worklog
Check your WKF button(or try replacing it,) if it's loose, presses itself, or is easily accidentally hit, that'll do it. Just a guess though.
SS
Check your WKF button(or try replacing it,) if it's loose, presses itself, or is easily accidentally hit, that'll do it. Just a guess though.
SS
BayCoder1
Member
Re: GameCude portable worklog
Got home, checked the wiikey button, and it turns out I didn't connect the 1.9v to the middle pin. I don't know if that would of caused the problem but I went ahed and re wired the whole button and it seemed to help, but didn't fix it completely. It freezes and makes a loud noise.
Got home, checked the wiikey button, and it turns out I didn't connect the 1.9v to the middle pin. I don't know if that would of caused the problem but I went ahed and re wired the whole button and it seemed to help, but didn't fix it completely. It freezes and makes a loud noise.
BayCoder1
Member
Re: GameCude portable worklog
Spent this week working and have a few updates.
I Wired the wii key to my gamecube. Wile working on my case I flocked it up. I tried to put in the L and R shoulders from a wii classic controller and it didn't work out to well,so I ordered new cases and I'm open to suggestions on what I should do for the shoulder buttons. I also got my battery in and built my Custom regs. I got a lot done this week and, if I'm lucky, I should have it done in three weeks.
Gamecube
Custom regs
Battery
Spent this week working and have a few updates.
I Wired the wii key to my gamecube. Wile working on my case I flocked it up. I tried to put in the L and R shoulders from a wii classic controller and it didn't work out to well,so I ordered new cases and I'm open to suggestions on what I should do for the shoulder buttons. I also got my battery in and built my Custom regs. I got a lot done this week and, if I'm lucky, I should have it done in three weeks.
Gamecube
Custom regs
Battery
BayCoder1
Member
Re: GameCude portable worklog
Made progress with the case today.
" Because all I had was pink, shut up"
I still haven't done anything else with the mobo but I can do that later. I have to Finnish the case this week because I will be going to visit my cousin next week, and I will Finnish the wiring while I'm there. Hopefully I will be done soon.
Made progress with the case today.
" Because all I had was pink, shut up"
I still haven't done anything else with the mobo but I can do that later. I have to Finnish the case this week because I will be going to visit my cousin next week, and I will Finnish the wiring while I'm there. Hopefully I will be done soon.
Monstercrunch
Active Member
Re: GameCude portable worklog
It looks very nice, keep working and updating !
If I were you, I would make a little cut of the modo. I didn't on mine but now I regret it, cause I think it's no that much complicate and it can save a lot of space !
It looks very nice, keep working and updating !
If I were you, I would make a little cut of the modo. I didn't on mine but now I regret it, cause I think it's no that much complicate and it can save a lot of space !
BayCoder1
Member
Re: GameCude portable worklog
Thanks everyone for the feedback.
I had to get a new mobo and still haven't cut it.
I bought 3ds replacement faceplates on eBay and they come with the faceplate. In fact there permanently attached and you have to cut them out. The faceplates are expensive, I bought 2 and payed 25$, but I had to get them since I needed the case done ASAP.
More updates soon.
Thanks everyone for the feedback.
I'm going to cut the Mobo. I already cut it once, but I hot glued the wiikey on and it made it a little too thick for me so I pulled up the wiikey and it tore off some resistors.Monstercrunch said:
I had to get a new mobo and still haven't cut it.gman said:
I bought 3ds replacement faceplates on eBay and they come with the faceplate. In fact there permanently attached and you have to cut them out. The faceplates are expensive, I bought 2 and payed 25$, but I had to get them since I needed the case done ASAP.
More updates soon.
