Did I wire this correctly?

[S5114]

Please excuse the late night shoop, wiring on a dead board, and forgetting to solder the wire to the 3.3v trace. The point is just to make sure I know what I'm doing.

The white wire isn't soldered to anything, it's just hanging about, and the black wire is relocating the trace.

My case layout

Almost impossible to see, but I just want to know if I could just solder to these resisters.

 

[metalblank]

this is up to u but i think it would be easyer for u to wire your 7.4 and 3.3 to the top of the board. also you can wire the controller to the resistors it will work fine

 

[S5114]

well, my case is too small to wire to the top

 

[metalblank]

im sorry but i dont understand

 

[S5114]

^^ Irony. I mean that to be able to fit the n64 into the case, I have to trim the top contacts.

 

[metalblank]

well if u wire it to the top it will still b lower than the main chips

 

[S5114]

?