Another GCp - The GameCube Control
- Thread starter VisionElf
- Start date
VisionElf
Member
Re: Another GCp Worklog
I think that in fact my iso are good, but the program is not working very well...
I extracted the game in .gcz, and rename it into .iso like you said, but doesn't work at all.
I've 10 differents games, with some .iso, no one works.
Only the Wii games works.
Does anyone know a good program to put files into a WBFS SD ? :/
I think that in fact my iso are good, but the program is not working very well...
I extracted the game in .gcz, and rename it into .iso like you said, but doesn't work at all.
I've 10 differents games, with some .iso, no one works.
Only the Wii games works.
Does anyone know a good program to put files into a WBFS SD ? :/
VisionElf
Member
Re: Another GCp Worklog
Hum my wiikey is not launched everytime... strange...
EDIT: Ok, so now i've this error :
So my wiikey is seen :
http://img827.imageshack.us/img827/2057/dsc0751w.jpg
Then it said this, I don't know why because i've 1 game and one update on it : (now it said correctly the update but the bug is here)
http://img26.imageshack.us/img26/1788/dsc0752rw.jpg
I select the update for example, it restart, and said :
http://img99.imageshack.us/img99/5818/dsc0753i.jpg
Its the "Can't load disc, please contact services etc..." error
When I press my switch the wiikey is loaded again, but no update is launching.
Don't know why it do that...
EDIT2 : MY BAD.
Games work, but not updates !
http://img32.imageshack.us/img32/6113/dsc0001kk.jpg
EDIT3 : Also, I have lot of freezes, and I must restart the whole gamecube :/
I don't know why... sometimes I've no freezes that allows me to play more than 15minutes, but sometimes right at the beginning of the intro, bam freeze :/
Any idea ?
EDIT: My Worklogs (In French):
http://www.youtube.com/watch?v=fkpmW8y9uGw
http://www.youtube.com/watch?v=jIAwb0qZ1OI
Hum my wiikey is not launched everytime... strange...
EDIT: Ok, so now i've this error :
So my wiikey is seen :
http://img827.imageshack.us/img827/2057/dsc0751w.jpg
Then it said this, I don't know why because i've 1 game and one update on it : (now it said correctly the update but the bug is here)
http://img26.imageshack.us/img26/1788/dsc0752rw.jpg
I select the update for example, it restart, and said :
http://img99.imageshack.us/img99/5818/dsc0753i.jpg
Its the "Can't load disc, please contact services etc..." error
When I press my switch the wiikey is loaded again, but no update is launching.
Don't know why it do that...
EDIT2 : MY BAD.
Games work, but not updates !
http://img32.imageshack.us/img32/6113/dsc0001kk.jpg
EDIT3 : Also, I have lot of freezes, and I must restart the whole gamecube :/
I don't know why... sometimes I've no freezes that allows me to play more than 15minutes, but sometimes right at the beginning of the intro, bam freeze :/
Any idea ?
EDIT: My Worklogs (In French):
http://www.youtube.com/watch?v=fkpmW8y9uGw
http://www.youtube.com/watch?v=jIAwb0qZ1OI
MoRZiLLo
Active Member
Re: Another GCp Worklog
If SSBM freezes there is a bad dump. Try another game.
You put the FAN on your cube? The posibilitiy of fried your mobo without fan is 90%
The wires of wiikey are long...for me...
Other thing is the sound... I have no idea. Sorry.
Very impressive worklog and good videos man
Almost wiikey run!!! hehe
Good Luck!
If SSBM freezes there is a bad dump. Try another game.
You put the FAN on your cube? The posibilitiy of fried your mobo without fan is 90%
The wires of wiikey are long...for me...
Other thing is the sound... I have no idea. Sorry.
Very impressive worklog and good videos man
Almost wiikey run!!! hehe
Good Luck!
VisionElf
Member
Re: Another GCp Worklog
Yea I tested some other games (but just one time) and it didn't froze, so I hope that it's the .iso, not the wiikey
The wires are long cause I just wanted to test for now. However I will maybe keep this wires, and fold them in place when it will be needed. They are quite thin
I didn't put a fan for some time (about 15min) and nothing special happened. Then I put the original fan on the rad
I will do something that almost everyone did, cut in the rad a place to put the fan
It seems that it's okay.
One question about that, is the original fan good enough for a portable ? Or I must buy another fan ? The GC is safe with the fan ?
Yea I tested some other games (but just one time) and it didn't froze, so I hope that it's the .iso, not the wiikey
The wires are long cause I just wanted to test for now. However I will maybe keep this wires, and fold them in place when it will be needed. They are quite thin
I didn't put a fan for some time (about 15min) and nothing special happened. Then I put the original fan on the rad
I will do something that almost everyone did, cut in the rad a place to put the fan
It seems that it's okay.
One question about that, is the original fan good enough for a portable ? Or I must buy another fan ? The GC is safe with the fan ?
MoRZiLLo
Active Member
Re: Another GCp Worklog
I'm thinking if the stock fan is enough(and ugly and fat), every fan thick is enough.
I have some laptops dead and got the thickest fans for test. All works well.
It's enough if work well. You can use two fans(thick fans also).
One for extract hot air and one for extract out of case.
How? Tha's is your question. Each one as you want.
I'm thinking if the stock fan is enough(and ugly and fat), every fan thick is enough.
I have some laptops dead and got the thickest fans for test. All works well.
It's enough if work well. You can use two fans(thick fans also).
One for extract hot air and one for extract out of case.
How? Tha's is your question. Each one as you want.
VisionElf
Member
Re: Another GCp Worklog
Bump !
My Case Prototype : http://img515.imageshack.us/img515/84/prototypeud.jpg
I have some parts of that, but not all, I will see how I build this later
This is a prototype, so it can be heavily changed during the time.
The proportions are not respected, as the screen is much bigger than that. (or the controller is smaller, depending on the point of view)
So for my wiikey, all is good except as I said I doesn't have sound, and I have an error when the wiikey menu is shown : "get header err"
So instead of writing the game's name I have a "Mounting..."
But the game is working fine.
Anyone know why ?
Bump !
My Case Prototype : http://img515.imageshack.us/img515/84/prototypeud.jpg
I have some parts of that, but not all, I will see how I build this later
This is a prototype, so it can be heavily changed during the time.
The proportions are not respected, as the screen is much bigger than that. (or the controller is smaller, depending on the point of view)
So for my wiikey, all is good except as I said I doesn't have sound, and I have an error when the wiikey menu is shown : "get header err"
So instead of writing the game's name I have a "Mounting..."
But the game is working fine.
Anyone know why ?
MoRZiLLo
Active Member
Re: Another GCp Worklog
Good pic! Your drawing skill is beauty!
For the sound Read this... viewtopic.php?f=36&t=2187
Good pic! Your drawing skill is beauty!
For the sound Read this... viewtopic.php?f=36&t=2187
VisionElf
Member
Re: Another GCp Worklog
Yea I already looked at this.
But the thing I don't understand is that before disassembling my GC, it worked (without the little mod) so It's strange if with the mod it works :/
However, I'll try but I doubt it will work.
EDIT : Okay, I tested it : IT WORKS oO
But I need some explanations :X
Yea I already looked at this.
But the thing I don't understand is that before disassembling my GC, it worked (without the little mod) so It's strange if with the mod it works :/
However, I'll try but I doubt it will work.
EDIT : Okay, I tested it : IT WORKS oO
But I need some explanations :X
VisionElf
Member
Up !
My first screen works again ! (In fact it always worked but i didnt know that
)
So I need some help to know how to wire it...
Here are some fact :
I have 7 pins, divided on the board by 2 groups : 3 and 4
The first 3 are : One red (+), one black (-), one green (G).
The + is connected to the 12V of the GC, and the - to the ground. That allow the screen to turn on
Then, in the 4 other pins, I have a group of 3 (they are regrouped by a tape) :
One Red (1), one white (2), one black (3), and the last pin alone is white (W)
When my screen is powered : the screen is white
one GC ground to (3) : the screen is black
one GC ground to (3) and the composite to (G) : the screen sparkles white lines
GC ground to (2) : the screen is purple
GC ground to (2) plus the composite to (W) : the screen is more purple
That's all I've got
I know that my method is not good, and may kill the screen, but that was the only method I know.
If you have other methods to detect which pin do what, tell me
My first screen works again ! (In fact it always worked but i didnt know that
)So I need some help to know how to wire it...
Here are some fact :
I have 7 pins, divided on the board by 2 groups : 3 and 4
The first 3 are : One red (+), one black (-), one green (G).
The + is connected to the 12V of the GC, and the - to the ground. That allow the screen to turn on
Then, in the 4 other pins, I have a group of 3 (they are regrouped by a tape) :
One Red (1), one white (2), one black (3), and the last pin alone is white (W)
When my screen is powered : the screen is white
one GC ground to (3) : the screen is black
one GC ground to (3) and the composite to (G) : the screen sparkles white lines
GC ground to (2) : the screen is purple
GC ground to (2) plus the composite to (W) : the screen is more purple
That's all I've got
I know that my method is not good, and may kill the screen, but that was the only method I know.
If you have other methods to detect which pin do what, tell me
superben51
Well-Known Member
Try using only those two power lines and a composite line. Take the line and poke the other contacts when the screen is powered and see if you get any thing there.
