Tchay
Frequent Poster
My composite video is a white screen for some reason. Occasionally flickers, has faint horizontal lines down the screen.
At first I relocated ground to the R40 resistor (as I had cut too close). And video worked fine. Then I picked the board up a little later, and I got the white screen. Even grounding the resistor no longer worked. I replaced it with an R40 on another board, and still got the white screen.
I get audio of the bootup sequence so the board isn't fried. Wiikey still flickers too.
How can I get composite back? Do I need to swap out the AV chip? This pretty much never works btw.
Could I get component cable to work? If so, I don't need composite for anything. But before wiring it, I would like some confirmation on that.
At first I relocated ground to the R40 resistor (as I had cut too close). And video worked fine. Then I picked the board up a little later, and I got the white screen. Even grounding the resistor no longer worked. I replaced it with an R40 on another board, and still got the white screen.
I get audio of the bootup sequence so the board isn't fried. Wiikey still flickers too.
How can I get composite back? Do I need to swap out the AV chip? This pretty much never works btw.
Could I get component cable to work? If so, I don't need composite for anything. But before wiring it, I would like some confirmation on that.
