MotherBoard Cut

[midgetman104]

What trim would I have to use to fit the gamecube motherboard into this case http://www.polycase.com/sl-53p

 

[samjc3]

I don't claim to be an expert, but I think the "maximum safe cut" should work.

http://forums.modretro.com/viewtopic.php?f=36&t=6476

 

[nuke]

The almostwtf cut and above will fit in that case.
However, considering you have to put multiple components, regs, etc in something that is only a inch and a quarter thin, it'll be tough for someone like you or me to do it.

I'm sure someone like Ashen or zenloc can do easily.

 

[zeldaxpro]

You are probably better off using an SL-68P. The dimensions are 6.02x4.01x1.50 (in inches). It is bigger than the 53 and would probably be easier to fit a mobo in (like almostwtf) along with other components needed like nuke said.

http://www.polycase.com/sl-68p

 

[Gannondorf929]

a medium cut can fit in a sl-68, so im pretty sure a max safe will fit in that one.

 

[midgetman104]

Oh I mean to but the sl-68p, my bad wrong link xD. but thanks guys, help is really appreciated. Do you think I could use a dremel to cut it, or would that be too imprecise?

 

[Gannondorf929]

sure u can dremel a mobo, just be super careful and look at the traces to mkae sure you do not cut any. I know a medium cut can fit in the 68, so you wont have to relocate the dd!

 

[midgetman104]

Okay I I just now broke my dremel cutting the heatsink anything else I can cut it with?