How Do i put leds In the gamecube?

NINT5DO0

Member
I know on the bottom of the cube theres power managment but....where to i put the positive and negative wires?
could somone show a picture or tell me where to put it?
is there a 1.9v anywhere?

can somone please help me? ps. i know how to soder AND wire
I just need to find an area where the positive wire can go then ill just use the black wire as ground
 
viewtopic.php?f=36&t=1654 go down to the part about relocating the power regulator (little board beneath the mobo) read the whole guide while you're at it, it will prevent you from asking already answered questions ^^
from the power regulator comes out 1,9 V in a few pins, and ground is shown. All of these infos are in the link, as for the placement of the pins ... Etc
 
Thanks so i just conect the pins from regulator to the surcuit board? im still not understanding ...completly
 
Your led needs 1.9V right? Just connect it to one of the pins of the regulatot giving 1.9V and the ground to one of the pins labelled "ground"
 
Back
Top