Search results

I used a piece of homebrew Blargaman91 sent me to try to find out if my triggers were working, and instead I discovered that my C-Stick was having serious issues. It turns out that while my main joystick ranges from 128 to -128 on the Y axis and 128 to -128 on the X axis, my C-Stick appears to...

I'm hooking up my controller board to my gamecube portable, but I'm not sure how to test all the inputs. Is there some sort of ISO I can load onto my WASP to check all the inputs? Right now I've just been booting up different games and trying to make sure all the inputs work. This is an issue...

Quick question before I start trigger wiring. Would this terribly drawn diagram be correct? Just want to make sure I don't accidentally short anything out once I start wiring. I would test myself, but my multimeter recently broke, and also the 3.3V and analog signal pins would both measure as...

After the images from Zeloc's double tact switch mod got taken down, I've noticed quite a few questions regarding how to this mod. I've made a couple of diagrams which by themselves seem to work, but when put together seem to mess everything up. In all 3 of the following diagrams, the (A)...

I've seen a lot of questions about triggers lately due to the wiring diagrams being removed on the guide in the sticky. Bush recently posted this awesome diagram for the softpress: ? = ground I plan to have 2 buttons side by side, one hooked up like in the diagram for softpress, and one...

So I've been working on a GameCube portable for around 10 months now and I've FINALLY finished with everything besides triggers and heatsink. I got the Thinkpad heatsink that everyone's been using for their portables, flattened the bottom, bought my non-adhesive Arctic Silver, but since the...

Ok, first time wiring up speakers, so I'm just so confused. I'm trying to hook up speakers from an iPod/iPhone case much like the iLuv speaker case. These two speakers are pretty good quality, and are hooked up to an amplifier. I hooked up the left and right audio channels from the gamecube to...

After going through Tchay's infinitely helpful cooling guide, I have bought a thinkpad heatsink because of its built-in fan and successfulness on other peoples portables. However, because the screwholes do not match up with the gamecube motherboard, I have not been able to apply it and I'm not...

LOW IMPORTANCE: The discovery of Wiikey compatibility with the gamecube is one of the most important things that has ever happened to GC moding, and so many users know so little about it. Pretty much every portable uses one, but most of us have no idea what all those wires are really doing. I...

Hey! I'm new to console moding, so please forgive me if this is a stupid question. I've been wiring my WASP fusion (Wiikey clone) to my disk drive pinout on my motherboard. I took off the port and am currently soldering to the back side of the board (Side B). However I've run into an issue...