Wiring the WKF to Gamecube. A question

[KazuyaX93]

Hey Guys,

I want to connect the WiiKey Fusion to my Motherboard.
But now, I've one question.
I wired 18 Wires to the Breaking-Board.
It will connect the following ports to the Motherboard ("1,3,5,7,9,11,13,15,17,19,21,22,23,24,25,26,27,28").
I read this Tutorial: http://www.made-by-bacteria.com/forum/v ... =40&t=2533

Is it right, that I need only 19 Wires (the 28 that I'd named before) and 1 GND-Wire, that I connect from the WKF to the MoBo?

 

[ShockSlayer]

One GND wire should be fine, you can also use the pins on the breakout board for ground

 

[megalomaniac]

dont forget 3.3v since that was not mentioned above....
you should highly consider installing a pin29 switch also....

 

[KazuyaX93]

dont forget 3.3v since that was not mentioned above....
you should highly consider installing a pin29 switch also....

already done, thank you