nephitejnf
Member
I am recasing a GBA and with the case I am using has a 4 battery slot and will let me make it so it has double capacity with 4 batteries. The reason I call it the softboy is because it is a soft case from Okwen Enclosures.
Here is about what it should look like.
This is what is leftover from the gba case.
It is obvious that there was some good ol' dremeling.
Then finally the battery compartment on the back, I will probably dedicate the sides like negative on the left, positive on the right.
I'm thinking of desoldering the soft tacts from the L and R position and putting them on the back in comfortable postitions and wiring it that way.
Here is about what it should look like.
This is what is leftover from the gba case.
It is obvious that there was some good ol' dremeling.
Then finally the battery compartment on the back, I will probably dedicate the sides like negative on the left, positive on the right.
I'm thinking of desoldering the soft tacts from the L and R position and putting them on the back in comfortable postitions and wiring it that way.
