SHAD0W First Gamecube Portable [UPDATED]

[SHAD0W]

Reserving this thread for log​

will be updated soon!​

Progress Of Parts:
[✔] Wiikey Not Yet ordered
[✔] PAL To NTSC Converter Ordered
[✔] Wiikey Ordered
[✔] Screen
"7inch TFT/LCD NTSC Looks really nice not to sharp on image but very colorful!
[__] Battery "see questions"
[__] Case/Housing
[__]

Progress Picture Log:
Current Gamecube Consoles

7inch TFT/LCD Screen Playing My Japanese Gamecube NTSC
Will switch to my other EU/USA Console when PAL To NTSC Converter arrives!

Sorry for the colour. Instagram photo.

Mock

Questions i would like to ask:
Motherboards and wiikey.

I have searched quite a bit to find information on DOL(P)-01 and its ipl
To no luck. this is the motherboard i am most interesting in OMGWTF cutting as the it doesn't have surface Resistors and is in most need of use.
]

Few Questions on this
Is this motherboard compatible For Wiikey?
My power for this motherboard had a blow fuse. i replaced it and it still didnt boot.
May have other blown fuses. *will test later on one of my working GC power boards*
Is it possible to connect a battery source dirrectly to the motherboard without the need for this power board?

Extra Advantages to using my Japanese Gamecube Motherboard Instead?

As far as i am aware my Japanese Gamecube is compatible for wiikey
The region switch can be easily made on this model
It is NTSC 60hz As appose to PAL 50hz Colors seem more vibrant and vivid on my display
I assume as its NTSC Out to NTSC In not having to run through Converter would add alot more room wouldn't require extra power
To consume as well

Also this motherboard is completely working unlike my Blue gamecube with a dead power board
Thoughts on that matter?

 

[Joeyjoe9876]

all pal consoles are wiikey compatible.

 

[SonyQrio]

Why does the blue one have a Vista and Intel sticker on it? XD

Oh, and I love that mockup. Paint it orange. We all love orange.

 

[Joeyjoe9876]

Why does the blue one have a Vista and Intel sticker on it? XD

Oh, and I love that mockup. Paint it orange. We all love orange.

if you also look the blue one is an empty shell
maybe hes planning on making a GCPC?

 

[SHAD0W]

Why does the blue one have a Vista and Intel sticker on it? XD

Oh, and I love that mockup. Paint it orange. We all love orange.

Why thank you.
And yes orange does stand out, i want to make it like the wiiU style but retain what made the gamecube funky and cool with its colours =)

Why does the blue one have a Vista and Intel sticker on it? XD

Oh, and I love that mockup. Paint it orange. We all love orange.

if you also look the blue one is an empty shell
maybe hes planning on making a GCPC?

Why yes sir
Seeing as though i can use my dol(p)-01 board < came from the blue GC
I will be turning that into GCPC =)
the stickers are just on there because the where looking tacky on my laptop

 

[SHAD0W]

Bought a plastic housing
Seems to fit well.
Its just far to deep... at least its a start.

 

[SHAD0W]

Sorry for the tripple post.

Just curious to see what you guys think...
DSI XL top screen = 4.2 inches

Buttom screen could be reoved and filled...
OMGWTF motherboard in bottom half...
Screen on top....
Original dsi/ds buttons remaped to gc controller... ? thoughts peoples

http://www.dealextreme.com/p/4-3-lcd-mo ... -pal-73626
http://www.ebay.com/itm/OEM-Nintendo-DS ... 2a1c187ef3

i mean serously look at this...

there pretty thin thats the only problem but extending that wouldnt be to hard at all.

 

[watsug]

It would be pretty awesome if you could fit it in an DSiXL

 

[Majora]

DSI XL top screen = 4.2 inches

You can't use that screen.

 

[superben51]

I think he meant that a 4 screen could fit in there...

 

[Majora]

Oops, sorry about that, misread it

 

[superben51]

I think that some gods briefly discussed putting one in a ds lite/3ds case but thought it would be too hard to make a good looking spacer for the mobo.

 

[Majora]

Pulling this off would probably make you one of the modding gods.

It would in my eyes anyway.