Repair ripped out pin ( gc regulator board)

[Moustachespy]

Hello.
Don't ask me how I managed to pull this off but I managed to completely rip out a pin from my regulator pin.
Is there any way of repairing the pin? Can I just replace the pin with solder or a cable? Any way of rescuing the regulator board? (and yes I am using a custom way and it was a pin I needed badly.)

 

[GarageFactory]

Re: Repair ripped out pin ( gc regulator board)

Can you explain in more detail about what pin you mean? Do you mean a connector pin or an actual part on the regulator board?

 

[Moustachespy]

Re: Repair ripped out pin ( gc regulator board)

Can you explain in more detail about what pin you mean? Do you mean a connector pin or an actual part on the regulator board?

Well the pins you need to relocate. The ones that had the connector.

 

[GarageFactory]

Re: Repair ripped out pin ( gc regulator board)

Could you possibly post a picture of the regulator that would help.

 

[Noah]

Re: Repair ripped out pin ( gc regulator board)

Could you possibly post a picture of the regulator that would help.

Yeah a picture would be best. Not that many people use the stock regulator as it is, so just post a picture of what you have currently.

 

[Moustachespy]

Re: Repair ripped out pin ( gc regulator board)

Could you possibly post a picture of the regulator that would help.

Yeah a picture would be best. Not that many people use the stock regulator as it is, so just post a picture of what you have currently.

Could you possibly post a picture of the regulator that would help.

I'm sorry but I got together with a good friend of mine. He told me that I could use the pin right above 13 and I should be fine. And I was. So Jeah... Also what can you use except the stock regulator

 

[Ampz]

Re: Repair ripped out pin ( gc regulator board)

Zenloc's custom regulator
link : viewtopic.php?f=36&t=2844