need oppinion of experts (which most are in here) about a little "plan B" i figured out since i wasted my second
lightscreeen´s LED.
i was exploring some ways to fix it with a 3mm white led, but a problem showed up: i dont get to see what´s happening behind the light!!
i know, many of you would think that it is misplaced, but i tried to put the lightscreen at 8 different possitions (4 each side), but nothing really worked :/
then is when i started experimenting on a GBC old screen. i ripped the foam and metal part from the back, and i found out i can light it from behind, but too much light makes the image in the screen invisible.
however, i didnt experiment just enough with this way out, so i rather asking than risking to waste more time doing this: would it be able to work with the right light setting or is it a dead end?
thx 4 replying
lightscreeen´s LED.
i was exploring some ways to fix it with a 3mm white led, but a problem showed up: i dont get to see what´s happening behind the light!!
i know, many of you would think that it is misplaced, but i tried to put the lightscreen at 8 different possitions (4 each side), but nothing really worked :/
then is when i started experimenting on a GBC old screen. i ripped the foam and metal part from the back, and i found out i can light it from behind, but too much light makes the image in the screen invisible.
however, i didnt experiment just enough with this way out, so i rather asking than risking to waste more time doing this: would it be able to work with the right light setting or is it a dead end?
thx 4 replying
