kylerock96
Active Member
I have one question, when i trim to the size of marios board(flashback 2) do i need audio/video amps? actually 2, what batteries for an sl-64p case?
portatari!
- Thread starter kylerock96
- Start date
zeturi
DEMON PIE!
I'm not sure if you're still working on this because of the last post date, but I've got some answers:
You won't need any kind of video amp, the Flashback 2 outputs a strong enough signal for standard lcds to use. You will need an audio amp however, since there aren't any good small screens with audio built in. I'd suggest building this: viewtopic.php?f=9&t=1231 . As for batteries, my suggestion is to use two 18650 lithium cells. They're 18 mm thick, and the SL-64p has 23 mm of inside depth. A 3.5 inch screen, audio amp, and Flashback 2 have hardly any power consumption. At 7.4v, it'd be something like 500 mah, if not a lil bit lower.
If you don't do it, I might, since nobody ever bought that Flashback 2 off of me.
You won't need any kind of video amp, the Flashback 2 outputs a strong enough signal for standard lcds to use. You will need an audio amp however, since there aren't any good small screens with audio built in. I'd suggest building this: viewtopic.php?f=9&t=1231 . As for batteries, my suggestion is to use two 18650 lithium cells. They're 18 mm thick, and the SL-64p has 23 mm of inside depth. A 3.5 inch screen, audio amp, and Flashback 2 have hardly any power consumption. At 7.4v, it'd be something like 500 mah, if not a lil bit lower.
If you don't do it, I might, since nobody ever bought that Flashback 2 off of me.
kylerock96
Active Member
Hold up, like 18650 MaH? If so, then I am using those. Well, should I include a cart slot?
kylerock96
Active Member
Ah, Dang, that will last forever! Like, 4 hours, if my math doesn't suck?
