qwertymodo
Member
I have several non-volatile (FRAM) N64 Controller Paks for sale. These controller paks do not require a battery, and so will not ever (well, for the life of the chip...) lose your saves. Right now, all I have are 1x cards, but the hope is to have 4x cards available in the near future (i.e. when I have money to order PCB's and FRAM chips). These are 100% brand new parts and PCB's, though the shells are used. At this point, all I have are the ones that look like this, with a couple different labels:
The PCB's I have also fit inside official N64 Controller Pak shells, but I already sold the 2 official shells I had. Here's a pic of one with the official shell:
I'm selling these for $30 each. If you just want a bare board, no shell, I can take $5 off. I also offer card cloning, if you have an existing card you'd like copied over to the new one. Card cloning is free with the purchase of a card, you just pay shipping to send me your old card.
Once I have 4x cards, I'll be selling them for $40. The 4x cards will come in cool clear cases like this:
I also have 2 prototypes I'd be willing to sell for $20. They've been tested and work fine, the only difference is that they are built on the original controller pak PCB's rather than the new custom ones I had made, and there is some manual rewiring done on them. I don't have any photos of the completed prototypes, but here's one of the prototype boards with its chip removed. Since this photo, I replaced the chip with F-RAM, removed the diodes, removed 2 of the resistors, removed the transistor, removed the battery clip, and added 2 wire jumpers in place of removed parts (the removed parts formed the power management for the battery and are no longer necessary).
The PCB's I have also fit inside official N64 Controller Pak shells, but I already sold the 2 official shells I had. Here's a pic of one with the official shell:
I'm selling these for $30 each. If you just want a bare board, no shell, I can take $5 off. I also offer card cloning, if you have an existing card you'd like copied over to the new one. Card cloning is free with the purchase of a card, you just pay shipping to send me your old card.
Once I have 4x cards, I'll be selling them for $40. The 4x cards will come in cool clear cases like this:
I also have 2 prototypes I'd be willing to sell for $20. They've been tested and work fine, the only difference is that they are built on the original controller pak PCB's rather than the new custom ones I had made, and there is some manual rewiring done on them. I don't have any photos of the completed prototypes, but here's one of the prototype boards with its chip removed. Since this photo, I replaced the chip with F-RAM, removed the diodes, removed 2 of the resistors, removed the transistor, removed the battery clip, and added 2 wire jumpers in place of removed parts (the removed parts formed the power management for the battery and are no longer necessary).
