nesP guide

heres my portable nes guide,
CKMbw.png
 
That's no guide.... It's a diagram!
But really it's good, decently helpful, I will probably look at it when I build mine but its not quite a guide
 
There's no protection circuit on that battery!
And that diagram shows nothing!
 
But it is. 7.4V cells are Li-Po or Li-ion. Get a protection circuit on that, and get a smart charger for it!
Okay, you don't really need them, as long as you're okay with living on a pile of toxic ashes.
 
ThatGuy-in-YourBathroom said:
well then i guess its a good thing its not then eh ;)

Yes, it is. Using a li-po cell without a protection circuit means your portable is a ticking firebomb.
 
Don't double post, especially when your last post was less than 30 min prior.
 
Hard to tell from a pic (especially from Mr. Blurrycam), but there may be a protection circuit on the side of the battery under the tape.
 
there isnt i just checked. this is the 7.4v protector im using.
!BvSJsYgCGk~$(KGrHqF,!hIEvri1owSfBMD7vrDEpQ~~_3.JPG

pretty straight forward right? just wire - and + from the battery to the b- and b+ right? and the p- and p+ to the console and stuff?

correct me if im wrong.

but what do i do with the com part?
 
Back
Top