Need help putting control stick on GBA

[βeta]

Using Sifuf's diagram. With no resistors on ground, it sticks on "up." With a flaxpile of resistors, it sticks on "up."

What the *Can'tSayThisOnTV*.

 

[bassmasta]

what values (of resistors)?

 

[βeta]

I tried a ton of different values.

 

[βeta]

Also, sound stopped working and I don't know why.

 

[Mako321]

What happens when you remove the analog? Up?

 

[bassmasta]

what happens when you push in any direction?

 

[βeta]

So basically, it works fine alone. Once I hook up the analog, it constantly holds up. If I connect the middle pin straight to ground, it holds up. If I put on some resistance, it holds up. If I hook up a TON of resistance, it holds up.


Has anyone ever put an analog on a gameboy before?

 

[bud]

Try this: http://kyorune.com/modding/article.php?id=27

 

[βeta]

Ah, that makes sense. Will try it in the morning. Gotta desolder it off of the board.

 

[XCVG]

Maybe your analog is broken. I had problems with an erratic stick on YAP64 which turned out to be the stick.

May I ask what the point of this is? Putting an analog stick on won't give you analog control, and I find it really awkward to use an analog stick in place of a d-pad.

 

[βeta]

GAMEBOY ARCAAAAAADE

 

[Royal]

Tiny joystock shaft is tiny.

 

[Bush]

VIDEO NAO

 

[βeta]

The shaft is proportional, it's just sitting in the hole. Haven't mounted it yet.

 

[Mako321]

SHOULDER BUTTINS

 

[βeta]

ON THE FACE ALREADY.

Start and Select will be going on the sides.

 

[bud]

*JIZZ*