N64 analogstick replacement compatibility list

[bentomo]

Analogsticks that work with yobo/retrobit controllers
---------------------------------------
1. official gamecube analogstick and c-stick
2. official wii classic controller analogstick
3. official wii nunchuck controller attachment analogstick
4. official ps2 analogstick

Analogsticks that work with superpad plus controllers
-----------------------------------------------
1. official gamecube Analogstick and c-stick
2. official wii classic controller Analogstick

Analogsticks that work with superpad controllers
-----------------------------------------------
1. official gamecube analogstick and c-stick
2. official ps2 analogstick

Please submit your own that you have confirmed or has been confirmed by a reliable member.

 

[J.D]

Re: N64 joystick replacement compatibility list

Joystick:

Analog stick:

Just sayin.

 

[bentomo]

Alright, fix'd since you want to get technical.

 

[Mako321]

my pc "joystick" is an analog stick

 

[XCVG]

XBOX S sticks work with a SuperPad Plus, for the most part. Sometimes they don't center well enough and it drifts a bit. Maybe my sticks are just too worn or something.

 

[bentomo]

Which model controller is the xbox s sticks. I should start including model numbers for all the third party stuff.

 

[snowpenguin]

1st party ps2 sticks work with the two handled superpad 64. Not sure about the plus.

 

[XCVG]

Which model controller is the xbox s sticks. I should start including model numbers for all the third party stuff.

Model number? I don't know. But it's an official XBOX S if that helps.

 

[bentomo]

Bump from the grave, does a mod think this is worth of being put into the megasticky? So it can be updated in the future?

 

[zeturi]

How funny, I was just reading this and thinking the same thing.

 

[ShockSlayer]

Added.

 

[hidiosoman]

I have a sumo controller that appears to be a rebranded Yobo controller and I couldn't get my 3rd party GC analog stick or my first party ps2 stick to work with it.

I then tried on a 3-handled superpad and they both worked perfectly. Both the 3rd party GC analog stick (the one from ebay) and 1st party PS2 analog stick.

 

[bentomo]

What's the brand of the third party gamecube joystick?

 

[hidiosoman]

Can't find a brand on it. Just one of these extremely generic ones: http://cgi.ebay.com/NEW-Game-Controller ... 083wt_1141

Also, with the first controller, I may have just soldered the pins incorrectly

For the second controller I followed the diagram in the SIXTH post: http://forums.benheck.com/viewtopic.php ... &view=next

 

[HardOtto]

I f I wanted to wire up one of these controllers to a PSP or 3Ds analog stick could I use this diagram:

I thought that because two of the pins on each potentiometer are wired together you can just wire the corresponding points on a 4 pin analog stick

 

[Prog]

No. What you should do is bridge the X and Y voltage ins and the X and Y grounds.

Diagram... tomorrow.

 

[HardOtto]

Thankyou very much

 

[bentomo]

This is what you want to use.

And I wouldn't use a psp nub, they don't have the full range and are very fragile compared to a 3ds circle pad. Trust me the expense is worth it.