LED mod problem

[GamecubePerson111]

Hi ive led modded my psone screen, but two of the leds flicker all the time, how should i go about fixing that?

 

[nobble]

check your solder connections and make sure none of the leads are touching.

 

[GamecubePerson111]

I've checked many times and no leads are touching, Ive even resoldered the connections to be safe but it's still not working.

 

[Jidan]

Make sure that the solder looks very shiny - cold solder could cause the connections to not be all that reliable.

 

[GamecubePerson111]

Translate

 

[Mario]

Your LEDs are burning out. You need a bigger resistor, like 50 ohms.

 

[snowpenguin]

April fools is a bad day to try and be serious on the internet.

 

[GamecubePerson111]

Ok, Ill look for a bigger resistor.

 

[Mario]

April fools is a bad day to try and be serious on the internet.

True, but I really was serious.

 

[GamecubePerson111]

I should have known

 

[zeturi]

I think some leds blink automatically.

 

[Basement_Modder]

No.

 

[zeturi]

http://cgi.ebay.com/100PCS-RED-3MM-Flas ... 27ac83b0be

BOOM.

 

[Mako321]

That was photoshopped.

 

[zeturi]

Your face was photoshopped.

There are other sellers on ebay as well that sell blinking LEDs. I thought I had found a good set of white ones, but it turns out that they were the blinkin type.

 

[themadhacker]

try a resistor next time of around 75 ohms. that is what my led mod is using, and there is still plenty of light.