GC AV screw up fix?

[Fluxedo]

I was toying around with my screen that came broken to see if there was anything I can do anything to get it to work. Whilst messing around with it, I disloacted the resisitor on the alternate AV out loactions. (http://i628.photobucket.com/albums/uu4/ ... ide/23.png The resistor connected to the middle yellow point.)
So, my TV is getting no signal. No audio either. What can I do? Can I hook up composite instead? The GC light is turning on and my WKF is blinking as usual. Can I use composite instead? I'm using THIS Monitor BTW. What should I do?

 

[Ashen]

That is composite, and those arent resistors. Just bridge it.

 

[Fluxedo]

I forgot to mention that I did already. Bad bridge?

 

[Ashen]

Unbridge it then.

 

[Fluxedo]

same result.

 

[public-pervert]

Never bridge capacitors that goes to ground or you'll have a short. Pick video directly to the AV chip.

 

[Fluxedo]

Did that public. I got some lines saw the GC logo very lightly and then it went to black and had a white line on the side of the screen. I'l see if it fixes when I hook up a 2.4k resistor from pin 15 to ground.

EDIT: I shielded the line and got better results. I'm assuming all I need now is the 2.4 k resistor. The output was balck and white btw.

 

[public-pervert]

I've ran the same problem on the PlayCube Pocket. The 2.4k resistor is crucial and will fix the issue for sure. Thanks again for the info, Ashen!

 

[Fluxedo]

So happy someone else had the exact same problem as me and was able to fix it. I was getting worried. Does it matter what side of the resistor I hook up to what?

 

[public-pervert]

Resistors doen't have polarity

 

[Fluxedo]

Can I use 2.2 kohm?

 

[Ashen]

Yes.

 

[Fluxedo]

Well, I hooked up the resistor to pin 15 and to ground and still had the same results. I have the screen and cube hooked up to different ground and voltages. Still getting the odd black and white only image. I dont have another screen so. I'll see if I can rig up a av cord to my TV to see if it's a faulty screen. I'm a little confused why it didn't work. Please help! I don't know what to do to ifx this.