Epoxy using a syringe help?

[Gamerlolwind]

hay guys, i have started my epoxying on my portable, and i have a question on how to use a syringe to draw epoxy in and apply to said part etc

i have tried sucking in epoxy using two syringes now and nothing,

how do i properly do it?

i epoxyed my screen glass thing on my case using a plastic knife thing, which works great. but how can i use a singe which will help me for better mounting etc?

does anyone have any advice/tips or can someone who knows how to use epoxy make a video to show me how to properly apply epoxy with a singe etc?

thanx

 

[hailrazer]

Break the needle off.

It will then be easier to suck up the epoxy and push it back out.

Put the cover over the needle and wiggle it back and forth and the needle will pop off.

 

[Gamerlolwind]

Break the needle off.

It will then be easier to suck up the epoxy and push it back out.

Put the cover over the needle and wiggle it back and forth and the needle will pop off.

thanx for the tip, hail
but i have tried what you mention here yesterday night and still no luck,
um,
does the epoxy have to be mixed together or just separated before using the syringe to draw it up?

or should i let the epoxy (both components) slip in the syringe form the top side and then mix and apply?

 

[ttsgeb]

Get a dental syringe or a meat syringe or something.
Also, You probably want to pre-mix it. I doubt that there is enough stirring in the syringe.

 

[hailrazer]

Mix it first. And heat it up a little so it flows easier.