Darkninja691
Member
My xeno mod chip is glowing solid green and won't read my burned discs. What did I do wrong?
Xeno Gc help
- Thread starter Darkninja691
- Start date
Darkninja691 said:
Check that the disc is being read, the laser is red and turn, if not read, can be the hard, use known brands. is a tutorial which involves moving a potentiometer to read almost all discs as SONY or Verbatim.
http://128bit.me/index.php?topic=26113.0
note: sorry for my bad english!
o si lo sirve aqui esta en español:
Compruebe que el disco esta siendo leído, el laser sea rojo y que gire, si no lo lee, puede ser el disco, utilize marcas conocidas. hay un tutorial que consiste en mover un potenciometro para que lea casi todos los discos como SONY ó Verbatim.
http://www.chilecomparte.cl/topic/232922-gcmanual-ajustar-el-potenciometro/
thecasperrojas
Well-Known Member
Ablas espanol es bueno saber q no solo avemos 4s en el forum dos d puerto rico y dos d maxico
Darkninja691
Member
It's solid green with out a disc in
Darkninja691
Member
Ok, but I'm referring to the xeno Gc
megalomaniac
Well-Known Member
jrikard0 said:
no, this is not always correct and not an assumption you can make with the little amount of information provided by the OP...
@Darkninja691
sometimes an incorrect solder installation can make xeno produce weird effects...
also chineese clones may use different color LEDs or accidentally swap LED locations...
before you power it on, get close and personal to be able to look at the LEDs...use a little mirror if you have to..
then power it on and see what happens....
with official title in the drive:
1. do both LEDs come on?
2. does one LED come on, turn on, then the other LED turns on?
3. does only LED always come on and stay lit?
...then repeat testing and see what happens with a backup DVD...
