Stranger491 Member May 23, 2011 #1 Can you vacuum form your Xbox 360 laptop case or do you have to use a different materials?
P peppie132 Member May 23, 2011 #2 you can vacuum form a case but it's easier to use a pre-made case, like a pelican case
βeta ModRetro Legend Jun 2, 2011 #4 You should not vacuum form something that big. For one, you can't do it in a standard oven. For two, that much flat space will flex a LOT without an internal skeleton.
You should not vacuum form something that big. For one, you can't do it in a standard oven. For two, that much flat space will flex a LOT without an internal skeleton.
Stranger491 Member Jun 3, 2011 #5 So if I didn't want to use a premade case, I would need to make it out of what?
Hermaphroditus Well-Known Member Jun 3, 2011 #6 If you have access to a CNC you can make it out of thicker plastic sheets, aluminum, etc.
P peppie132 Member Jun 3, 2011 #7 take some plastic, and make it out of that by cutting it in pieces and glue it together or something like that
take some plastic, and make it out of that by cutting it in pieces and glue it together or something like that