Will this work (soldering Gamecube MoBo (to regulatorboard)

[KazuyaX93]

Hey Guys,

today, I'd soldered five wires to the MoBo of the Gamecube.
It should connect the Regulator Board and the MoBo.
Is this okay?

I used this screenshot from the tutorial:
http://s14.directupload.net/file/d/3264 ... 3b_png.htm

 

[sonictimm]

Re: Will this work (soldering Gamecube MoBo (to regulatorboa

You don't need the 12V line, but it won't hurt to have it.
It looks pretty good.
have you met Kasar's guide? It recommends using a slightly thicker wire for ground as well as 5V

 

[CPCookieMan]

Re: Will this work (soldering Gamecube MoBo (to regulatorboa

You don't need the 12V line, but it won't hurt to have it.
It looks pretty good.
have you met Kasar's guide? It recommends using a slightly thicker wire for ground as well as 5V

In my case, not having the 12V line silenced it.