Wii DVD/Wiikey Fusion/WODE (sd/hdd loading) on Gamecube

[Ashen]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

Revised the Pinout/Pinmatch in the first post to reflect on the newly discovered SD swap trick for GC multidisc games. Updated and cleaned up the megaguide/compatibility list a bit on GC-forever. http://www.gc-forever.com/forums/viewto ... ?f=3&t=416

 

[Hackmodford]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

Can you please explain the SD swap trick?

 

[Hugo_Peters]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

I have a PAL DOL-CPU-10 board, a few more broken 10's, and one CPU-01.
Will that work for me or do I have to worry and go searching for a CPU-11?

 

[Ashen]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

Can you please explain the SD swap trick?

http://www.gc-forever.com/forums/viewto ... ?f=3&t=416

I have a PAL DOL-CPU-10 board, a few more broken 10's, and one CPU-01.
Will that work for me or do I have to worry and go searching for a CPU-11?

We have fpund that it comes down to what IPL revision is on your cube. You can find out what IPL you have by running swiss http://www.gc-forever.com/forums/viewto ... f=25&t=373

 

[Hugo_Peters]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

Can you please explain the SD swap trick?

http://www.gc-forever.com/forums/viewto ... ?f=3&t=416

I have a PAL DOL-CPU-10 board, a few more broken 10's, and one CPU-01.
Will that work for me or do I have to worry and go searching for a CPU-11?

We have fpund that it comes down to what IPL revision is on your cube. You can find out what IPL you have by running swiss http://www.gc-forever.com/forums/viewto ... f=25&t=373

Dang too bad my qoob is broken and my XenoGC is messed up with bad soldering skills...
Any fast dol loading possibility's?

~Hugo

 

[Hugo_Peters]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

Can you please explain the SD swap trick?

http://www.gc-forever.com/forums/viewto ... ?f=3&t=416

I have a PAL DOL-CPU-10 board, a few more broken 10's, and one CPU-01.
Will that work for me or do I have to worry and go searching for a CPU-11?

We have fpund that it comes down to what IPL revision is on your cube. You can find out what IPL you have by running swiss http://www.gc-forever.com/forums/viewto ... f=25&t=373

Nah, I know for almost 90% sure that I have a PAL revision 1.0
All my GC's where Rev 1.0 so I just BET this one has that too.
Is that good, or bad?

 

[Ashen]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

PAL IPL v1.0 is working, NTSC IPL v1.0 is not.

 

[Tchay]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

Hey Ashen, how is the compatibility on "DOL - CPU - 20" motherboards??????

As far as I know, these CPU - 20 NTSC motherboards are the ONLY type that can be trimmed down enough to fit in a PSP, GBA, DMG, etc.

So, I'm hoping CPU - 11 boards arent the only working NTSC motherboards for Wiikey fusion.

 

[Ashen]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

Hailraizer just did a cpu-20 board and reported it working. As long as its ntsc ipl 1.1 it should be fine.

 

[Basement_Modder]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

 

[Tchay]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

Hailraizer just did a cpu-20 board and reported it working. As long as its ntsc ipl 1.1 it should be fine.

are all NTSC "CPU - 20" boards going to be ipl 1.1????

 

[Ashen]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

Very good likelyhood that they are.

 

[Hugo_Peters]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

In the XenoGC screen (you know, when you hold start while booting)
It says PAL Revision 1.0
Does that mean that it's IPL is 1.0? (Just to be sure before I buy something useless again )

 

[Ashen]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

In the XenoGC screen (you know, when you hold start while booting)
It says PAL Revision 1.0
Does that mean that it's IPL is 1.0? (Just to be sure before I buy something useless again )

I'm not sure man. I've never owned a xeno chip. Either way PAL IPL v1.0 is working with the wiikey. you should be fine.

 

[Hugo_Peters]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

In the XenoGC screen (you know, when you hold start while booting)
It says PAL Revision 1.0
Does that mean that it's IPL is 1.0? (Just to be sure before I buy something useless again )

I'm not sure man. I've never owned a xeno chip. Either way PAL IPL v1.0 is working with the wiikey. you should be fine.

YAY, I'll just go for it!
First, I have to save moneh and then I'll make a little vid about it!

 

[Ashen]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

WODE Jukebox http://www.wodejukebox.com/home.php is confirmed working with the GC. Wiring is the same as the Wiikey Fusion.

 

[Hugo_Peters]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

WODE Jukebox http://www.wodejukebox.com/home.php is confirmed working with the GC. Wiring is the same as the Wiikey Fusion.

I KNEW THE WII WAS A GC IN A DIFFERENT CASING!!!

 

[Tchay]

Re: Wii DVD + Wiikey Fusion (sd loading) on Gamecube

Very good likelyhood that they are.

Okay! So I found a seller on ebay with a bunch of "DOL - CPU - 30" motherboards....He says they also have the Digital port (so we know they are still rev A/B)

Now, Before I buy them, does anyone know if CPU - 30 will work with Wiikey

AND

can we still trim CPU - 30 and not have issues with memory card.
(something tells me I'm going to have to figure this one out for myself).

 

[wyadith]

Based on functioning statistics newer boards have a better working chance but it depends I guiess
I couldnt test but it might be worth it
Have a price or link?

 

[Hugo_Peters]

I got another little question, is the picture of the GC mobo-disc-drive-connector pins in the superguide, taken from the front or back of the mobo?