Wasp Fusion with swiss Flashed problem

[Bakuku]

Hi all,

Some time ago I bought a Wasp Fusion from Badassconsoles. These come Pre-Flashed with Swiss.
But the thing is, when it boots up the Swiss menu freezes on "Int Wiikey Fusion".

The wiring is good because the other Wasps I bought from there all work. Even a Wiikey Fusion with 1.5 Firmware. So I know it's the specific Wasp unit.
The blue LED flashes and then when the freeze happens it stays on.

Is there a way to fix this?

I've tried different SD card readers from working units, changed region settings, everything but no GO

Thanks

 

[Blargaman91]

That is what happens when your SD card is not formatted correctly or the SD slot is not connected correctly. The SD card needs to be formatted as FAT32, which requires special software if it's bigger than 32 gigabytes.

 

[Bakuku]

That is what happens when your SD card is not formatted correctly or the SD slot is not connected correctly. The SD card needs to be formatted as FAT32, which requires special software if it's bigger than 32 gigabytes.

It is formatted corectly.
But it seems to work now. Just have to press it a little harder in the sd reader dor some reasen.

Thanks