Gamecube VGA mod

[leadbullet1990]

Does anyone think its possible to add a VGA port to a DOL-101 Gamecube? (The one with the built in regulator.) I just need to know what chip is in charge of the video output, and what i need. Thanks in advance.

 

[thecasperrojas]

did you relocated the gray tuberler thing if not do it cuz if you dont it may not work and also thats a bad jod next time use a more stady tool and also look for the cap C96 if its not there that mobo no longer works

 

[leadbullet1990]

No, All I have done is change the LED form orange to red. I have not changed anything on the motherboard yet. I want to know if its possible or not.

 

[megalomaniac]

if you are talking about using an official component cable VGA mod for the DOL-101....

well, you better have a donor DOL-001 available because you will have to swap out a lot of parts from the 001 to the 101 just to even be able to test if its possible...
...but considering the list of parts you need to swap, you might as well get a DOL-001...

 

[leadbullet1990]

No, A VGA port on the Back of the cube. I can see without the Digital AV port on the board, it would take a miracle to do.