Five inches of TFT fail. Help needed please.

Hum, from what I saw in your video, (I saw the flickering)
Um could you show us a pic of your setup? As that may help to find out what the issue is.

Also, from a quick google search, I got two answers from TFT flickering,

1) check your cables (mainly the video one) yellow av cable, I couldn't see very clearly your setup in your 0.06 video, a pic would help, but make sure that the video wire (yellow) is sheilded to prevent the flickering, as the video wire transmits the video SIGNIAL and if it isn't shielded that can cause video issues.

Also, make sure that the screen is getting power properly, I mean that the power cable is properly plugged in and such. If not unplug it and replug it back in.

Um, if you soldered the neassary wires needed for your screen, make sure you did it right, and haven't mixed up GnD with anything else.

And check your soldering of the av area on the GC side. Make sure the proper wires are where they should be etc.

Hope this helps you :)
 
u6e4a7ym.jpg


This is from kasars gcp guide you have s video signal going to your oops. Mega overt on gcf started to point you to it. But use this for a pinout for that area.


Edit: gc to screen oops.
 
Back
Top