CopperBrute
Member
After the portableising gods saved my 64 I am back. After about the 5th hour of testing the electronics the 64 turned off so I assumed the voltage was to low for it or something. I was quite confused because the screen was still on and the voltage was still ok (running 11.1v 6.8Ah). After closer inspections my Ti regulator broke and gave my 3.4v a nice 7.4v. I hooked the 64 board back up with the original power outlet a week ago (few months after the test) and it still runs! Don't ask me how the 64 did not break, but I wont complain !
I am not waiting on a few new parts I orderd. All i need now (I think) is an audio amp (recommendations would be appreciated) and anything new I might break.
For a robotics group I need to design some parts for a challenge. I have only used Inventor Pro for assemblies so with no previous knowledge I just started playing around. I build this concept for the case front and decided I would share it with you! This is in Pre-Alfa stage so...
I do not think im going to print it, but if I get the option I will. Some things are quite ugly like the c and d pad I know. Any comments or recommendations are welcomed! This is more of a reintroduction post than anything.
I would say i'm sorry for the big picture but come on bigger is always better, o wait...
I am not waiting on a few new parts I orderd. All i need now (I think) is an audio amp (recommendations would be appreciated) and anything new I might break.
For a robotics group I need to design some parts for a challenge. I have only used Inventor Pro for assemblies so with no previous knowledge I just started playing around. I build this concept for the case front and decided I would share it with you! This is in Pre-Alfa stage so...
I do not think im going to print it, but if I get the option I will. Some things are quite ugly like the c and d pad I know. Any comments or recommendations are welcomed! This is more of a reintroduction post than anything.
I would say i'm sorry for the big picture but come on bigger is always better, o wait...