Battery Questions.

[Σigma]

If I used three of these cells : http://www.batteryspace.com/li-ion18650 ... korea.aspx

in this holder: http://www.batteryspace.com/Battery-hol ... 20AWG.aspx

EDIT : I mean this one : http://www.batteryspace.com/Battery-hol ... 20AWG.aspx

I would get an equivalent 11.1v battery with 2600 mah. Correct?

And then, will a rev. C. Gamecube start up at 11.1v, and how long approx. would 2600 mah power one?

Thanks.

 

[Spoleyo]

well for that holder that holds 3 batteries youll get 3.7x3 for a total if 11.1v and 4 like you wanted is 14.8v like you said..and the mAh always is the same so yes its 14.8v 2600mAh

 

[Σigma]

well for that holder that holds 3 batteries youll get 3.7x3 for a total if 11.1v and 4 like you wanted is 14.8v like you said..and the mAh always is the same so yes its 14.8v 2600mAh

Oops. Ok. Then does anyone know if a rev C GC will power on @ 11.1v ?

 

[Ashen]

Yes, a rev C cube will power on at 11.1v. The max of a 11.1v pack is roughly 13v or so fully charged. 2600mah will get you about an hour and a half playtime... roughly... without a screen, etc.

 

[Σigma]

Thanks. Will running it at 13v do any harm to it? Then how should I go about charging this pack? Could I use the original gamecube adapter?

 

[Spoleyo]

well is it a neccessity to use those batteries with that pack..because there are some a lot easier to use.

 

[Σigma]

Oh. What other batteries would work better?

 

[Spoleyo]

this is just an example. it comes with pcb prewired and charge port.

http://www.hobbypartz.com/83p-5000mah-3s1p-111-30c.html

 

[Σigma]

Oh. Ok. thanks. And I've altered my design slightly, so I don't need to worry about batteries right now.

 

[Spoleyo]

no problem..im guessing this is a gamecube portable...are you going to be making a worklog?

 

[Σigma]

Tommorow.