Re: Fusion Micro ~ Worklog
To relocate the controller, all you need to do is scratch a couple of pads on to a ground area with a hobby knife and solder the 2 ground legs down to hold it.
Re: techknott's Gamecube SD - Vid Added
:lol: Yeah, I totally agree about the big analogue sticks. I was thinking about chopping them down but don't have replacements in case it went wrong. I'll work something out for the next one maybe. Ive no doubt you've figured it out already and i cant...
Re: Fusion Micro ~ Worklog
Dont know if this will help, but this is how I did my triggers. They work perfect.
This will be awesome btw, things are getting crazy!
Ok, I finally got around to playing with a fusion last night and got everything working properly except the switch/eject. All you need to do for that is wire a push to make tact switch between pin 29(wiikey) and 1.9v(gc) - that's it - no ground. Also, just fyi, wiikey firmware 1.0 works fine...
Re: Move over NGP... Introducing the Gamecube Fusion!
Wow, get home from my hols to this! Cant believe how good it turned out and on your first go! Nice one.
Tchay, did you make sure it's was the right way round? If you look closely, there is a grey stripe down one side and a number on it(315 I think). There are two different types on the board and only one will work.
Relocated the AV chip. Its probably not worth the hassle as there are a compulsory 20 wires needed. Anything less and you get intermittent issues like black/white and distortion and relocating the aram will almost certainly result in timing issues.