Recent content by Mahjarratian

Try adding a second wire on the 1.9v line, the cpu/gpu both use it, and sometimes one isn't enough.

Check continuity from the pin 29 pad and common ground, pin 29 needs to be grounded without pressing anything. He does in the second picture, but it could be empty. (In my experience, WASP would boot in pass-through if the card had nothing on it.)

Yes, it's set to NTSC for usa/canada.

I have checked the ffc, nothing was broken. Had continuity on all the pins, but I'm thinking of buying a new wasp altogether.

So I just tested 2 other sd cards, both had the same issue. An 8gb and 16gb class 4 sandisk. Also tried with a wii, which had same led blinking issue. The issue is seeming to be the wasp/sd card slot, is there anything I should try before getting another?

Someone had posted this awhile ago: http://www.eurasia.nu/shop/product_info.php?products_id=431 I've not bought from here, however, so you might want to wait for someone else to chime in.

Yeah, I had to go back and re-read it as well. I've personally never heard of a fuse going out first, but it's a possibility.

Yes, but he stated that he had 12v coming in, meaning if he had checked here, it could be the fuse, as this goes into it. Regardless, it wouldn't hurt to check, and it'd rule it out entirely.

Since you said it gets 12 volts, but isn't generating 3v3, maybe the fuse got popped? You should have continuity on both sides of this.

@Lego Yeah, it does seem like an sd issue, although it recognizes it enough to load swiss. I don't currently have another sd card, but I will be going to the store soon, any brand/size/speed I should avoid/look for? @Mega 1: It's the same sd as the one I loaded into swiss with, that is giving a...

(Camera is at brothers, can get pics in a few hours/day or two) I have an ntsc-j gamecube, which has been "switched" to ntsc-u, wired up with a megadrive v6.(lid jumpered, p29 to ground) When loading swiss from the wasp, it loads into the select menu, (disc/sdgecko/ect) instead of the file...

Stock regulators, both of 'em, i'll sand the edges again and try in a few, will update when I do. Edit: Huh... I didn't sand, and just rewired the reg, its working fine now. (Perhaps a cap needed drained?) But I will sand just in case that was the problem, thanks. :)

Hello everyone, I'm having an issue with this Gamecube, I'm thinking something fried, but would rather have a second opinion on the matter. http://imgur.com/a/9pNNr (couldn't help the glare, ask for pics of specific areas if needed) Story, wired up Megav6, and everything worked fine, loaded a...

Spent a couple hours messing with the transistor wiring, and it's genuinely confusing me. :( From what I get from the picture, it would be wired like this? (shamelessly "borrowed" from Ashen's GC trim guide :)) Other than this, no progress, cleaned up the heatsink a bit, doesn't look so...

Thanks for the reply! I do have the cable, but it's just the colours, (red, white, blue, green, yellow, unshielded) not the header pins, that got clipped and tossed without a second thought. :oops: Could I wire data/3v3 to the chip, Ashen's pinout shows 2 data-in lines, which confused me...