WASP Disc Read Erroring in Patterns

[legofan623]

Portable is 99% 100% complete, I was happily playing different games off the SD card, and now all I get it this:

https://youtu.be/kIjuDNr8Iz0

I know the wiring is good because I was playing different games for roughly 15 minutes. I had this error before actually, and I just reversed the ffc cable and then it was fine, but I did it this time and it's still being weird.

 

[Blargaman91]

That is what would normally happen if your pin 29 wire is not grounded. Before we had Swiss, the menu would flash like that and you would have the press the pin 29 switch to intialize the Wiikey. It could still be some other wiring issue, too. It must be something related to the physical connections somehow.

 

[legofan623]

I have pin29 on the av port's shielding... Is that a bad place?

Edit: I replaced the wire and ground point. It was working great until I pressed the R button in SSBM which game me an error, and now the wasp won't load again

Edit 2: Its been fine for the past 24 hours now, weird