WiiKey Help Needed.

My WiiKey wont work.

Had it running fine Yesterday.

Went to clean up the wiring and when I re-soldered it all back together it doesn't want to work for me.

Video:
http://www.youtube.com/watch?v=SseQIywJ58c


Info:
  • Followed Diagrams from http://forums.modretro.com/viewtopic.php?f=36&t=6003
    Read and reread that and the official troubleshooting forum (didn't want to bump old stuff)
    Did work yesterday.
    No orange light
    Blue light acts as it should
    Checked continuity about 8 times tonight
    As well as tracing each wire to make sure its in its proper spot
    Tested WiiKey with a WII and it works fine
    Dol-CPU-30
    All grounds are grounded by there own wire (except for 2)
    FFC is in proper place(tested each time it was reinserted with a continuity test
    Firmware 1.5 (loaded and confirmed on WII)
    2GB SD card formatted WBFS with 1 game on it (Tested on Wii, loads and plays fine)

Other info provided upon request!

Anybody have any ideas? It looks like its working fine, except its not grabbing the info right. I can't think of what would be different.

Thanks!
 
I had that many times, cause my solder weren't good.
The only reason I can see is that your solder are also not good.
 
Maybe you have a IPL version 1.0? Maybe because I remember that a long time ago, I had an action replay disk and it didn't work for my IPL 1.2 but for my (maybe... I'm very unsure) IPL 1.0 gamecube. Just trying to help.
 
Thanks!

However I have got a cpu-30 which is not one of the 1.0.



Since the first post i have fixed the error and it is now working perfectly.
 
Nice! Also I forgot to mention in my other post that when in the disk menu screen on the gamecube IPL 1.0 the question mark was purple. This may help other people, I don't know.
 
Oh, i thought fusion worked on the GC,
then whats the difference between the wiikey, wiikey fusion and the wiikey 2?
 
Back
Top